User`s guide

Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
7-18
Micro-Band Voice Over IP
The MVoIP function of the Magnum Router gives the ability to encapsulate any frame relay data
that is supplied on any of the WAN ports into a routable IP packet that can be sent over any IP
LAN environment (including the Internet). This function is covered in detail in the next chapter.
Before programming any data into the MVoIP screen, certain requirements must be
met. These requirements include having to have a WAN Configuration Map entry (See WAN
Configuration in this chapter) using a DLCI between 900 and 989 that is mapped from an
y
WAN port to the E1 port, and a WAN-IP Route Map entry for Frame Relay routing that also
uses a DLCI that is between 900 and 989. In the Sample chapter there is configuration
information that further defines the requirements and just exactly how to program the
Magnum Router for MVoIP.
The MVoIP functionality of the Magnum Router is covered in more detail in chapter 8 with
programming samples in chapter 9.
Add a NEW MVoIP
en try into th e
configuration
D elete an M VoIP entry
from the configuration
Save any changes to the
Magnum Router
Manager
E xit th is s c reen to the
Main Screen
MVoIP DLCI (Entered in
the W AN Configuration
screen)
Destination MVoIP
Address
Source MVoIP Address
N otes regarding this
entry
MVoIP Type
Figure 22 - MVoIP Screen