User`s guide
Table Of Contents
- Introduction
- Magnum Router Features
- Pre-Installation
- Installing the Hardware
- Magnum Router Manager Installation
- Logging Onto a Magnum Router
- Magnum Router GUI Manager
- Magnum Router Manager Main Screen
- Toolbar Buttons
- New Config Button
- Port Config Button
- WAN Config Button
- Other WAN Config Buttons
- Master WAN-IP Address
- WAN-IP Route Map
- Advanced Routing
- RIP Version 1 Routing
- Ethernet Config Button
- Micro-Band Voice Over IP
- Save Configuration
- Send Configuration
- Reboot the Magnum Router
- Menu Bar
- Configuration Menu (ALT-C)
- Settings Menu (ALT-S)
- System Menu (ALT-Y)
- Statistics Menu (ALT-T)
- Help Menu Item (ALT-H)
- Exit Menu Item (ALT-X)
- Toolbar Buttons
- Magnum Router Manager Main Screen
- Magnum Router Specialized Functions
- Sample Configurations
- Magnum Router Troubleshooting
- Magnum Router Cable Specifications
- Marathon Port Configuration
- Configuration Worksheets
Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
7-25
Remo
This menu item is used to access another Magnum Router within the network.
ly, then remote access is
ot available. Selecting this function will display the following screen:
tely Access a Magnum Router
This menu item is only available if the Magnum Router Manager is
currently logged onto a Magnum Router.
Remotely Access a Magnum Router
Select this function to access a remote Magnum Router. It is important to note that remote
access is only possible if IP routing has been programmed on the Magnum Routers. If the
Magnum Routers in a network are programmed for frame-switching on
n
Enter the remote IP address of the Magnum Router (and password if necessary) and click on
e Connect button (or press ALT-C).
een successful, the main screen will reflect this by showing the
mote icon as shown below:
th
If a remote connection has b
re
he
is the remote icon. It is ONLY present when a remote unit is being accessed.
T