User`s guide
Table Of Contents
- Introduction
- Magnum Router Features
- Pre-Installation
- Installing the Hardware
- Magnum Router Manager Installation
- Logging Onto a Magnum Router
- Magnum Router GUI Manager
- Magnum Router Manager Main Screen
- Toolbar Buttons
- New Config Button
- Port Config Button
- WAN Config Button
- Other WAN Config Buttons
- Master WAN-IP Address
- WAN-IP Route Map
- Advanced Routing
- RIP Version 1 Routing
- Ethernet Config Button
- Micro-Band Voice Over IP
- Save Configuration
- Send Configuration
- Reboot the Magnum Router
- Menu Bar
- Configuration Menu (ALT-C)
- Settings Menu (ALT-S)
- System Menu (ALT-Y)
- Statistics Menu (ALT-T)
- Help Menu Item (ALT-H)
- Exit Menu Item (ALT-X)
- Toolbar Buttons
- Magnum Router Manager Main Screen
- Magnum Router Specialized Functions
- Sample Configurations
- Magnum Router Troubleshooting
- Magnum Router Cable Specifications
- Marathon Port Configuration
- Configuration Worksheets
Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
7-27
Configuration Menu (ALT-C)
Figure 26 - Main Screen Configuration Menu
New Configuration File
This menu item is the same as clicking on the “New Config” button of the main screen. All
settings within the Magnum Router Manager are defaulted and the “Set Magnum Name” screen
will be displayed.
Opening Configuration File
You can access a configuration file saved on your hard drive.
When this option is selected, the file open screen will be displayed.
Select the configuration file desired and click Open to load it into the Magnum Router Manager.