User`s guide
Table Of Contents
- Introduction
- Magnum Router Features
- Pre-Installation
- Installing the Hardware
- Magnum Router Manager Installation
- Logging Onto a Magnum Router
- Magnum Router GUI Manager
- Magnum Router Manager Main Screen
- Toolbar Buttons
- New Config Button
- Port Config Button
- WAN Config Button
- Other WAN Config Buttons
- Master WAN-IP Address
- WAN-IP Route Map
- Advanced Routing
- RIP Version 1 Routing
- Ethernet Config Button
- Micro-Band Voice Over IP
- Save Configuration
- Send Configuration
- Reboot the Magnum Router
- Menu Bar
- Configuration Menu (ALT-C)
- Settings Menu (ALT-S)
- System Menu (ALT-Y)
- Statistics Menu (ALT-T)
- Help Menu Item (ALT-H)
- Exit Menu Item (ALT-X)
- Toolbar Buttons
- Magnum Router Manager Main Screen
- Magnum Router Specialized Functions
- Sample Configurations
- Magnum Router Troubleshooting
- Magnum Router Cable Specifications
- Marathon Port Configuration
- Configuration Worksheets
Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
7-28
At noted in chapter 7, version 2.x of the Magnum Router Manager saves files with a
“.cf2” extension. This is the default. If a version 1.x configuration file needs to be opened,
click on the down arrow next to the Files of type box and select Magnum Configuration 1.
x
(*.cfg) option and the version 1.x configuration files will be displayed.
Saving Configuration Files
Saving a configuration is similar to opening a configuration file. After selecting, the following
screen will appear:
At this time, the configuration file can be saved as the same name as it was loaded, or just
change the configuration file in the File name box to save under a different name. And, just like
Open Configuration, the configuration can be saved as a version 1.x (.cfg) or version 2.x (.cf2)
configuration.