Specification

TILE SPECIFICATIONS
Developed by Nature Pebble 12 in. x 24 in.
tile shown in corridor horizontal pattern
Tile Specifications
STANDARDS &
REGULATIONS
TILE SPECIFICATIONS PAGE 3 OF 4
Abrasion Resistance, ASTM C1027-99
The durability of glazed tile is measured subjectively by observing the visible surface abrasion of the tile when
subjected to the ASTM C1027-99 testing procedure. Marazzi evaluates glazed tile recommended for floor
applications using this test method which includes the following classification system:
CLASS ONE
Tile in this class may withstand soft-soled foot trac, provided that dirt and/or other abrasives are not
present on the wear surface. Class I tile should not be used in areas with direct access to the outside or large
amounts of foot trac. See Frost Resistance for installation-specific details.
CLASS TWO
Tile in this class may withstand soft-soled and some normal foot trac provided the dirt and/or other
abrasives are kept to a minimum. Class II tile should not be used in areas with direct access to the outside,
large amounts of foot trac, or areas exposed to abnormal footwear. See Coecient of Friction and Frost
Resistance for installation-specific details.
CLASS THREE
Tile in this class may withstand normal footwear and regular trac, with some dirt and/or other abrasives
present in limited quantities. Tile in this class may be used in light commercial installations with limited foot
trac and with no direct access to the outside including residential kitchens and hallways, with limited trac
from the outside. See Coecient of Friction and Frost Resistance for installation-specific details.
CLASS FOUR
Tile in this class may withstand heavier amounts of trac with greater amounts of dirt and/or other abrasives
present including commercial kitchens and areas with regular trac from the outside. See Coecient of Friction
and Frost Resistance for installation-specific details.
CLASS FIVE
Tile in this class may withstand constant foot trac with larger amounts of dirt and/or other abrasives
including airports, malls, and other commercial walkways subject to high volumes of foot trac and constant
trac from the outside. See Coecient of Friction and Frost Resistance for installation-specific details.
Coecient of Friction, DCOF Wet Areas (Minimum 0.42)
Water, oil, grease or other fluids create slippery conditions. When installing floors in areas with exposure to these
conditions, a minimum DCOF value of 0.42 is required. Additionally, extra caution is required with regards to product
selection and proper maintenance. Visit www.tcnatile.com for complete information regarding the DCOF Acutest
sm
test method and values.