Use and Care Manual

Developed by Nature Porfido
12 in. x 24 in. tile shown in herringbone pattern
Dal-Tile Corporation
TILE CARE &
MAINTENANCE
CARE & MAINTENANCE GUIDE PAGE 4 OF 6
NATURAL STONE NEW INSTALLATIONS continued)
Sealing
A premium natural look penetrating/impregnating
sealer is the normal choice on polished or honed
marble, limestone, granite, or where the natural color
of a slate is desired. A stone enhancer sealer is often
used on tumbled, antique stones or on slate where a
darker, enriched or highlighted character is desired.
When choosing either one of these types of sealers,
make sure the brand you have chosen is formulated to
provide maximum stain protection for stone products.
Stone products should be tested periodically per
manufacturer’s instructions to insure that the sealer is
working eectively.
Penetrating/impregnating stone sealers are a no-
sheen, natural look sealer that can be water-based
or solvent-based, good for interior and exterior
applications. Most quality sealers of this type are
rated to protect the stone for several years. Stone
enhancer sealers are also a no-sheen, penetrating/
impregnating sealer that is formulated to darken,
enrich and highlight the natural color and beauty of
stone products. They will rejuvenate and improve the
appearance of worn and weathered stone.
Always test loose pieces of stone to ensure desired
eect with enhancing sealers. However, they will also
darken the color of grout joints. They are, generally,
suitable for interior and exterior use, and rated to
protect the stone for several years. Always reference
manufacturer’s literature for specific information on
the duration of the sealer’s protection and make sure
that the sealer is applied in strict accordance with the
manufacturer’s instructions.
Finishing
A stone floor finish should be applied to a polished
Natural Stone floor only. This type of product will help
enhance the shine and provide a protective coating
for “soft” or polished marbles. Verify the finish is a
wax-type finish designed to add luster and enhance
the beauty of sealed and polished Natural Stone
only. A topical finish may change the appearance and
performance of your stone, so always test a small area
first. Application of topical sealer or wax should never
be done as an attempt to add a shine to a honed,
scratched or non-polished stone product. This will only
create maintenance and/or a slip resistance problem.
MANUFACTURED STONE
Routine Care
Care should be taken to avoid smearing mortar on the
surface of the veneers. Accidental smears should be
removed using a dry whiskbroom only after mortar
has dried completely. Never use a wet brush or wire
brush. Do not power-wash, sandblast, use acid or
acid-based products. Dirt or other materials may
be removed with a strong solution of granulated
soap or detergent and water with a bristle brush. Do
not use a wire brush, as it will cause damage to the
surface. Rinse immediately with fresh water. Regular
maintenance only requires rinsing the surface with
water occasionally to remove dirt.
Sealing
Seal with a breathable, non-film forming masonry
sealer, to prevent staining from rusty downspouts,
splattered mud, etc. Sealing is strongly recommended
for dry-stacked applications and/or for harsh
environments.