Operation Manual

ManualsBrandsMarc Jacobs ManualsAMLED Digital

caseback time setting

time setting

1. push button to move hands.

2. set to correct time.

english

date models

date setting

1. pull the crown out to position 2.

2. turn the crown either clockwise or counter-clockwise and set the date for the

previous day. the direction that moves the date varies on different watch models.

time setting

1. pull the crown out to position 3.

2. turn crown to advance the time and continue until the day/date changes to the

present day.

3. set to the correct time.

4. push crown back to position 1.

321

date

front

pusher

button

for time

adjustment

back

Summary of content (7 pages)

PAGE 1
english date models 1 2 3 date date setting 1. pull the crown out to position 2. 2. turn the crown either clockwise or counter-clockwise and set the date for the previous day. the direction that moves the date varies on different watch models. time setting 1. pull the crown out to position 3. 2. turn crown to advance the time and continue until the day/date changes to the present day. 3. set to the correct time. 4. push crown back to position 1.
PAGE 2
chronograph with date fs20 (1 crown/2 pushers) chronograph second hand a 24-hour hand chronograph minute hand 1 2 3 b second hand date time setting 1. pull crown out to position 3. chronograph second hand will return to zero position. do not return the crown to its normal position while the hands are returning to zero, or else the position the hands are at when this is done will be recognized as the new zero position. 2. turn to set hour, minute and 24 hour hands. 3. return crown to position 1.
PAGE 3
chronograph stopwatch vd53b (1 crown/2 pushers) a minute hand 24-hour hand 1 2 3 b second hand time and date setting 1. before setting the time, make sure the chronograph is stopped and set to zero (12:00) position. 2. pull crown out to position 2. 3. turn crown clockwise until the previous day’s date is displayed. 4. pull crown out to position 3 when the second hand is at the 12:00 position. 5. turn crown to set time. note: 24-hour hand moves correspondingly with the hour and minute hands.
PAGE 4
big date chronograph 5040.b (1 crown/2 pushers) date second hand push button a minute hand crown hour hand center stop-second push button b minute counter 1/10 second counter (hour counter after 30 minutes) time setting 1. pull the crown out to position 3. 2. turn the crown to set the desired time. 3. push crown back to position 1. date setting 1. pull the crown out to position 2. 2. turn the crown until the correct date is shown in the date window. 3. push the crown back to position 1.
PAGE 5
digital fl133 A C B D time and date setting 1. press b three times in the time/calendar mode to enter into the time setting mode. second will start flashing. 2. press c to adjust seconds to “00”. 3. press d to next setting item. setting sequence will be cycled by second, minute, hour, date, month and day of week. 4. press c to adjust the flashing digit. 5. press b to return to the normal time mode. alarm setting 1. in the time/calendar mode, press b twice to switch to alarm mode.
PAGE 6
digital fdt0013 A normal time display 12-hour format. press a once to show date. press a twice to show second. press a again to return to normal time display. B normal time setting press b to select the setting digit, and press a for increment of the blinking digit.
PAGE 7
led digital A mode B set time and date mode 1. press a to view time. note: animation will be displayed for 2 seconds before time is shown. 2. with time shown, press a to view date. time setting 1. press a to view time. 2. with time shown, press and hold b for 2 seconds. 3. press a to select 12 or 24 hour format. 4. press b for next setting field. 5. press a to set value. 6. repeat steps 4 and 5 until desired time is reached. 7. press b to exit time setting mode. date setting mode 1. press a to view time.