Operation Manual

3
chronograph with date fs20
(1 crown/2 pushers)
time setting
1. pull crown out to position 3. chronograph second hand will return to zero position.
do not return the crown to its normal position while the hands are returning to zero,
or else the position the hands are at when this is done will be recognized as the new
zero position.
2. turn to set hour, minute and 24 hour hands.
3. return crown to position 1.
date setting
1. pull crown out to position 2.
2. turn clockwise to set the date.
3. return crown to position 1.
chronograph operation
1. push a to start/stop the chronograph.
2. push b to reset the chronograph.
chronograph zero reset
1. pull crown out to position 3.
2. press a to set the chronograph second hand to 12:00 (zero) position. each press
advances the chronograph second hand one mark. if a is held down for over 2 seconds,
the chronograph second hand advances continuously.
3. return crown to position 1.
321
a
b
chronograph
second hand
chronograph
minute hand
24-hour hand
date
second hand