Specifications

Enter Setup

1560 Series Barcode Scanner User Guide

try every 5 seconds to re-connect to the host unless you have the scanner read the “Reset

Connection” barcode.

 For BT SPP Slave Mode, the scanner waits for the host to re-connect.

 For BT SPP Master Mode, the scanner resumes the connection with the host upon

powering on again as long as the host application is running. You will hear three short

beeps, tone ascending from low to high upon resumption. If the scanner fails to resume

the connection, it will try every 5 seconds to re-connect to the host unless you have the

scanner read the “Reset Connection” or “Restore System Defaults” barcode.

 With the use of 3656, the scanner tries to re-connect 3656 unless you turn off the

scanner.