USER MANUAL 3 COLOR SONAR ICE SYSTEM VX-1P MA-034-MK Rev A, Date: 9/2/08
www.marcumtech.com Table of Contents Introduction.............................................................................................................................................................................. 3 General Description ................................................................................................................................................................ 3 Ice System Set-Up ....................................................................................
www.marcumtech.com Ice System Set-Up Introduction Your VX-1 ice system requires some assembly prior to being ice ready. You will need to attach the sonar bracket to the ice shuttle, place the battery in the recessed tray, hook-up the positive and negative lead from the VX-1 power cord to the battery terminals, and route the transducer cable through the ice arm and connect to the back of the sonar unit. You will also need to place the unit in the enclosed softcase.
www.marcumtech.com edge mounted against the transom. The leading edge of the transducer should be mounted flush with bottom of the boat. This can be best achieved by using a flat object like a ruler and holding it flat along the bottom of the boat and matching the bottom of the transducer to the bottom of the boat. Attach the mounting hardware to the highspeed transducer as shown in the instructions included with the transducer.
www.marcumtech.com Zoom - The VX-1 is equipped with a "bottom zoom" feature. When the ZM key is depressed the circular display is divided in half. The right half of the display (12 to 6 o’clock on the dial) will become the entire depth range (20, 40, 80, or 160 foot) you chose when turning the depth range knob to your desired depth setting. This will be indicated by a red light at the zero mark (12 o'clock) and another red light at 6 o'clock.
www.marcumtech.com 3.5 feet per 10 foot of depth. In 10 feet of water, the coverage is 3.5 feet; at a 20-foot depth, the signal beam is 7.0 feet across; and in 30 feet its 10.5 feet of coverage. User Tips Reading Through Ice - The VX-1 will provide accurate information reading through ice providing the ice is reasonably clear. Ice that appears milky or full of air bubbles will make it difficult or impossible to get an accurate reading.
www.marcumtech.com responsibility to track their products sent out in the mail or other forms of delivery service. Nature Vision Inc. will not be liable for lost packages sent out in the mail. Unless specified otherwise, do not include batteries or other accessories when returning the product for repair. Nature Vision, Inc will not be responsible for lost or damaged accessories. Please allow a minimum of 10 business days to complete your repair. Nature Vision, Inc.
-8-
