Specifications

6/18/2009 4
2.6 USB socket
The mixer has a mini-USB socket for connection to a PC for setting the internal real-time clock.
This is used for adding a time-stamp to each recording.
Instructions for setting the clock are described in chapter 3.3 in this manual.
The USB socket is also used for setting 16 or 24 bits recording resolution.
Along with a specially made cable connected to the USB port a LTC time code signal may be
connected for jamming the internal clock to frame accuracy.
This cable uses pin 4 for LTC signal and pin 5 for GND.
The LTC signal level should be approx. 1 V
p-p
for proper jamming.
The USB socket may also be used for software updates.
Instructions for use are included with the update, when available.
Check for updates frequently at http://www.marenius.se.