User`s guide

Puck Air Dive computer
6
To enter the Set Data menu, press and hold the
button. Either FRESH or SALT will appear.
SET DATA  FRESH / SALT
To ensure maximum accuracy, you need to
set Puck Air for either fresh water (“Fresh”)
or seawater (“Salt”) as appropriate. Check
this setting often, especially if you use the
instrument in a variety of environments
(lake, sea, swimming pool). Press and hold
the button to enter change settings mode
(Figure 13).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
1
2
4
5
6
7
8
9
10
11
3
Fig. 13
Press the button to select the desired mode.
Press and hold the button to confirm your
selection.
Press the button to move to the next selection.
 WARNING
Before diving, make sure you have
correctly set the units of measurement. An
incorrect setting may give rise to confusion
during the dive, and hence to under water
behavior errors.
SET DATA : °C  METERS  BAR / °F  FEET  PSI
You can select the units of measure to use:
metric (°C, m, bar) or Imperial (°F, ft, psi)
(Figure 14).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
1
2
4
5
6
7
8
9
10
11
3
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
1
2
4
5
6
7
8
9
10
11
3
Fig. 14
Press and hold the button to enter change
settings mode.
Press the button to select the desired unit of
measure.
Press and hold the button to confirm your
selection.
Press the button to move to the next selection.
SET DATA  N2RESET
Use this function to clear the residual nitrogen
memory in the tissue compartments.
 WARNING
This option is intended only for
“Dive Centers” and “Dive Stores”.
Users who clear the residual nitrogen
memory cannot use the instrument for
repetitive dives. After this operation, do
not dive with Puck Air if you have already
dived within the previous 24 hours.
In Set Data mode, display the word N2Reset
(Figure 15).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
1
2
4
5
6
7
8
9
10
11
3
Fig. 15
Press and hold to enter; the word “no” will
begin to flash (Figure 16).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
1
2
4
5
6
7
8
9
10
11
3
Fig. 16
If you do not want to clear the residual nitrogen
memory in the tissue compartments, press
and hold when the word “no” is displayed.
Press the button to change the selection.
To clear the residual nitrogen memory in the
tissue compartments, press and hold when
the word “yes” appears (Figure 17).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
1
2
4
5
6
7
8
9
10
11
3
Fig. 17
In order to really clear the residual nitrogen
memory in the tissue compartments you have
to confirm your choice (Figure 18).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
1
2
4
5
6
7
8
9
10
11
3
Fig. 18
NOTE
If you do not want to clear the residual
nitrogen memory in the tissue
compartments, press and hold when the
word “no” is displayed.
Press the button to change the selection.
The word “yes” will begin to flash (Figure 19).
Fig. 19
To clear the residual nitrogen memory in the
tissue compartments, press and hold, when
the word “yes” appears. Appears the figure 20.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
1
2
4
5
6
7
8
9
10
11
3
Fig. 20
Press the button to move to the Esc position.
Press the button to return to the Set Data
menu.
Press and hold the button to exit this menu
and return to the main menu.
ADJUSTING THE ALARM
PARAMETERS: SET ALARM
In this menu you can activate or deactivate
the alarm signals that can be triggered during
the dive.
• Reserve H (reserve)
• Reserve L (minimum reserve)
• fast asc: on/off (Air and Ean only)
• audio: on/off.
Scroll through the main menu and move to
Set Alarm (Figure 21).