- RAA100 Rudder Angle Adapter User's Manual

RAA100 User’s Manual
Page 10 Revision 1.0
Figure 5 – Troubleshooting Guide
If these steps do not solve your problem, please contact Maretron Technical Support (refer to
Section 7 for contact information).
6 Technical Specifications
Specifications
Parameter Value Comment
Accuracy +/-2% Does Not Include Inaccuracies of Analog Gauge or Sender
Resolution +/-1% Worst Case (Resolution Better at High Resistance Values)
American Standard Senders 240-30 ohms Standard Sender Types are User Selectable
European Standard Senders 10-180 ohms Standard Sender Types are User Selectable
Calibration Resistance Range 0-300 ohms Non-Standard Sender Calibration
Electronic Calibration Yes Eliminates need to mechanically adjust or calibrate
Analog Gauge Support Yes Can be Used With or Without Analog Gauges
Certifications
Parameter Comment
NMEA 2000 Level B+
Maritime Navigation and Radiocommunication Equipment & Systems Tested to IEC 60945
FCC and CE Mark Electromagnetic Compatibility
NMEA 2000
®
Parameter Group Numbers (PGNs) - See Appendix A for Details
Description PGN # PGN Name Default Rate
Periodic Data PGNs 127545 Rudder 10 Times/Second
126464 PGN List (Transmit and Receive) N/A
126996 Product Information N/A
Response to Requested PGNs
126998 Configuration Information N/A
059392 ISO Acknowledge N/A
059904 ISO Request N/A
060928 ISO Address Claim N/A
065240 ISO Address Command N/A
Protocol PGNs
126206 NMEA N/A
Electrical
Parameter Value Comment
Operating Voltage 9 to 16 Volts DC Voltage
Power Consumption <100mA Average Current Drain
Load Equivalence Number (LEN) 2 NMEA 2000
®
Spec. (1LEN = 50mA)
Reverse Battery Protection Yes Indefinitely
Load Dump Protection Yes Energy Rated per SAE J1113
Mechanical
Parameter Value Comment
Size 3.9”” x 1.2” x 1.0” Excluding NMEA 2000
®
Connector & Cable
Weight 9 oz.
Mounting Any Orientation