Instructional Manual
1. Check the box for any damage. If damage is caused because of shipment, it must be
reported immediately.
2. Make sure you have all the parts:
a. Gas Regulator and Hand Shower Nozzle with ON/OFF Control.
3. If you are using a regular standard garden hose, please use the ½" NPT to connect the
garden hose adapter included. Please use the sealing tape (Teon) on the threads to avoid
leaks. Also check if the screen lter from the water inlet is in its place, make sure it is
cleaned from any particles blocking the water entrance. Having this done, then you are
ready to attach the water input/garden hose.
4. Install the gas supply into the inlet gas pipe. Do not over tighten it since this can break or
crack the inlet pipe. After you tighten the inlet pipe, make sure it cannot be moved so as to
avoid any gas leak or malfunction.
5. Connect the shower nozzle to the water outlet. Make sure you use Teon and connect it
by hand pressure only.
6. Install the two batteries size "D". The batteries case will show you how to install the
batteries correctly.
b. Hardware Pack and ½” NPT to Garden Hose Adapter.
HOW TO START
06