MATEY HEATER CORP. Congratulations! + INDEX You've just purchased a new Power Pak Plus thankless wale heater and will soon begin to enjoy the benefits of ‘going thankless” QUICK START GUIDE 04 WARNING 05 Louse lake the time to thoroughly read and understand this safely and installation manual in its entirely before you attempt fo install your new thankless wale heater, as it congaing important safety ps and instructions. PACK CONTENTS 05 Please carefully read all Instructions and warnings.
QUICK START GUIDE POWER PAX MODELS WARNING: Working with electricity can be dangerous. If you are not knowledgeable about basic clerical practices and local building codes please DO NOT attempt to install this unit without the assistance of a licensed slectriclani™ 1} Securely mount your water heater in an appropriators location using the hanging bracket and wall anchors supplied with the unit. 2} Make the plumbing connections using 14" NPT fittings.
The wire gauge necessary will vary based on amperage and distance to the breaker, but 8 gauge wire is generally sufficient for most installations. If the distance is very short, sometimes smaller gauge wire may be used. If you aren't sure which gauge of wire should be used, contact an electrician. The supply wires, man switch and circuit protection (Leakage Circuit Breaker) must be sufficient for the amperage required.
INTERNAL COMPONENTS SAFETY Working with electricity requires proper skills and knowledge — Installation of the unit should ba performed by someone who is familiar or trained in this rads. Wa HIGHLY recommend that you hire the services of a licensed and qualified “Electrician/Plumber” familiar with thankless water heaters installation. IMPROPER INSTALLATION CAN CAUSE INJURY OR EVEN DEATH. IMPORTANT: All electrical work and unit fixing fo the wall should be completed before connecting electrical wiring.
2, The unit must be mounted on a flat surface in a vertical position with the incoming and outgoing water pipes facing down. it is not possible to install the unit horizontally. Please use the installation sticker guide and screws supplied in the product's original package. Drill the wall for the indicated holes. Check that there are na hidden wires or pipes, before drilling holes for wall mounting. 3. Secure the bracket fo the well with the screws supplied. 4.
Power | Eater Selector | Temperature Off | Cold (0A) | Temperate 1208) | Hot 111 (304) | Hotter Hi (404A) | Max. Hot Water Temperature TEMPERATURE CONTROL The water temperature is altered by increasing or decreasing the flow rate of the water through the water heater, vie the temperature control knob. Increased amperage seeings will result in increased walrus temperature. Small Drop: Lower water outflow. Warmer water, Big Drop: Higher water outflow, Less hot water.
SPECIAL EQUIPMENT AND ADVICE TO LISPS The pressure relief device Is designed into the water heater. The device will work automatically, when excessive build up of pressure occurs. Do not replace the pressure relief device with any other screw, The units built of fireproof material. There is a safety thermal cut-out device in the water heater.
CUSTOMER SERVICE OTHER PRODUCTS At Mara, we pride ourselves on the excellence of our customer service and support Mara proudly manufactures water heaters and accessories for use In almost any team. application. Pleads visit our website lo ls arm more about other Mara products. Please feel free to contact us if you have any questions about our products, warranty service, or if you need assistance installing a unit.