Instructions / Assembly

If your water heater requires a reset, be sure to TURN OFF THE BREAKER prior to
resetting the unit.
Resetting your unit without turning off the breaker can result in personal injury and
damage to your water heater.
Thank you for purchasing a Marey Power Pack. The Power Pack unvented pressure
system water heater is manufactured to the highest standards and has been designed
to meet all the latest relevant safety specifications.
This Power Pack water heater must be installed, commissioned and maintained by
a competent person. Please read and understand these instructions prior to
installing your Power Pack unvented pressure system water heater. Particular
attention should be paid to the section headed SAFETY.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning the use of the
appliance by a person responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
Heater
Fixing screws and plugs
Installation and User Instructions
Connections:
Inlet / Outlet connection -1/2" BSP
Water entry point - bottom
Cable entry point - bottom/rear
04 05
Electrical:
Model numbers
7.0kW - 94 805 005
9.0kW - 94 805 006
Electrical rating................................................................. 6.4/7.0kW @ 230/240V
..........................................................................................8.3/9.0kW @ 230/240V
Rated Pressure:
7Kw/9Kw
Materials:
Back plate, cover - ABS
Element(s) - Copper sheathed rod type.
Dimensions:
Height - 8.27" - 210mm
Width - 6.30" - 160mm
Depth - 4.33" - 104mm
Standards and Approvals:
Complies with the requirement of UL.
Complies with European Community Directives (CE).
Fig. 01