The Navigator Tahiti™ FROZEN CONCOCTION MAKER TM The Best Margaritas Come From Margaritaville Model DM3000 Series User Manual ®
We know you are excited to start making fabulous Frozen Concoctions… so please take a moment to read these important safeguards and instructions before you begin. Be safe. Have fun. And enjoy! IMPORTANT SAFEGUARDS WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING: 1. READ ALL INSTRUCTIONS BEFORE USING. 2. To protect against electric shock, do not immerse appliance, cord or plug in water or other liquids. 3.
14. To reduce risk of injury to persons, never place a Blending Blade Assembly on the base of a Blending Station without a Blending Jar properly attached. 15. Do not leave appliance unattended while it is operating. 16. To disconnect, turn control to Off, then remove plug from wall outlet. 17. Do not use appliance for other than intended use. 18. Never place fingers or other utensils into feed or discharge areas. 19. Check Ice Reservoir for presence of foreign objects before using. 20.
Welcome to Margaritaville ® Margaritaville® isn’t a place, it’s a state of mind … it is an escape from the everyday! The Margaritaville® “Tahiti™” Frozen Concoction Maker™ makes it a short trip from here to there, where you can put on your no-worries attitude and enjoy a perfectly prepared, restaurant-style frozen drink. The “Tahiti™” instruction manual was developed to help quickly familiarize you with your Frozen Concoction™ Maker.
Frozen Concoction Maker ™ PARTS LIST 1 1. Ice Reservoir Lid – Covers the Ice Reservoir. 2 2. Ice Reservoir – Holds the ice for making frozen drinks. 3 3. Hopper Cover – Keeps ice contained in the hopper. 4 4. Integrated Thumbscrew Lock with Shaving Paddle assembly – Moves ice across the Shaving Blade. DO NOT SEPARATE INTEGRATED THUMBSCREW FROM ICE PADDLE. 5 7 6 5. Ice Hopper – Holds the Ice for shaving. 6. Ice Shaving Blade with deflector – Shaves ice. 8 7.
13 13. Jar Lids (3) – Seals the Blending Jars. 14. Plastic Jars (3) – To blend frozen drinks; maximum capacity of 24 oz. each. 14 15. Blending Jar Sealing Rings (3) – Seals the Blending Jars and Blending Base. 16. Blending Blades (3) – Blends ice and ingredients to create frozen drinks. 15 16 17 17. Blending Jar Bases (3) – Secures the blending blade to the blender jar. 18 19 20 18. Ice Melt Reservoir – Holds melted ice run off. 19. Power Cord Storage Door – Covers power cord storage area. 20.
Making frozen drinks And now for the fun part! You are just a few short steps away from enjoying your perfectly blended, restaurant-style frozen drink. Before you use your Frozen Concoction Maker™ for the f irst time, we recommend that you read through these simple steps to get to know the features of this unit. Before you know it, you’ll be whipping up perfect drinks for your guests! preparing the unit for use 1. 2. Place the unit on a clean, dry, flat surface.
The Best Concoction recipes Margaritas (Ritas)-24 fluid oz. Ingredients Margaritaville® Gold Tequila Triple Sec Lime Juice Orange Juice Margaritaville® Margarita Mix fl oz 2 2⁄3 2⁄3 11⁄3 11⁄3 2 2⁄3 Frozen Mojito Slush-24 fluid oz. ml 80 20 40 40 80 Strawberry Daiquiris (Daiquiris)-24 fluid oz. Ingredients Light Rum Sugar Cranberry Juice Frozen Strawberries fl oz ml 3 90 2Tbs 30 180 6 11⁄3 C 315 Mudslides (Slides)-24 fluid oz.
Adding Drink Ingredients to the Blending Jars 7. Lift and remove the three Blending Jars NOTE: AT THE CENTER BLENDING STATION, THE ICE CHUTE IS SPRING-LOADED AND WILL RETRACT WHEN REMOVING THE BLENDING JAR. 8. 9. Remove the lid of each Blending Jar. 10. Add ingredients to each Blending Jar based on the type of drinks you will be making at each Blending Station to be used for this cycle. Pull out the Recipe Drawer to refer to drink recipes.
NOTE: NEVER SHAKE OR REMOVE A BLENDING JAR DURING OPERATIONBLADE ASSEMBLY WILL BE DAMAGED 15. If all three Blending Jars are in use for this cycle, the Ice Chute will rotate to the left jar and begin the auto Shave-n-Blend™ function. The unit will shave ice for the appropriate time (based on the Drink Selection type selected for that Blending Station). The blending will then start automatically. NOTE: THE WHITE LED LIGHT WILL BLINK TO INDICATE WHEN EACH STATION IS IN USE. 16.
• When the Ice Chute stops over the desired Blending Station, push the toggle switch up to the SHAVE position to add more ice to the Blending Jar. • Release the SHAVE switch when you have added the desired amount of ice. • To blend in the additional ice, push the toggle switch down for that Blending Station until the desired consistency is achieved. • To stop blending, release the toggle switch. • You can also achieve thicker drinks by reducing any amount of liquid ingredients for the respective recipe.
Cleaning and Maintenance IMPORTANT: Your Blending Jars, Shaving and Blending Blades are subject to wear during normal use. Always inspect for nicks, chips, or cracks. Always carefully inspect for broken, cracked, or loose blades. If any of the Jar or Shaving and Blending Blades are damaged, do not use. Call our toll-free customer service number, 1-877-689-2737, to obtain replacement parts. 1. 2. Make sure unit is unplugged. Place on a clean dry surface. Turn the unit so the back is facing you.
6. Turn the Shaving Blade Assembly Nut counter clockwise (to the left), remove the Shaving Blade Assembly, rinse and dry prior to storage in a safe place (Figure 7). BE SURE TO RINSE THE SHAVING BLADE AND DRY THOROUGHLY BEFORE STORING. 7. 8. Carefully lift the Blending Jar(s) straight up to remove. At the center Blending Station, the Ice Chute is spring-loaded and can be pushed up. If the Blending Jar is not easily removed, rock gently and lift. Do not twist.
Troubleshooting If the Power Indicator Light does not light: Check that the unit is plugged into a working power outlet. If liquid leaks from the base of the Blending Jar: Remove it from the unit and check that the Blending Blade Sealing Ring is properly installed and that the Blending Jar Base is tightened. If water leaks from the unit: Empty the Ice Melt Reservoir.
1 Year Limited Warranty Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period.
DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE For product questions: Sunbeam consumer services U.S.A. 1-877-689-2737 www.margaritavillecargo.com © 2008 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. ProductsMargaritaville® is a registered trademark of Margaritaville®. Printed in China -14- P. N.