Owner`s manual

26. FAQ LIST
1. How do I navigate through menus?
2. What are the playing areas on cymbals?
3. What is the standard YES instrument configuration, and what are the Mark Drum
YES sounds?
4. How are special sounds automatically assigned to tom rims and auxiliary pads?
5. How do I create an auxiliary pad?
6. How do I know if an auxiliary pad is Pad1, Pad2, Pad3 or Pad4?
7. How do I configure a tom to become a snare, or vice versa?
8. How do I perform a Sound Module firmware upgrade?
9. How do I perform an instrument firmware upgrade?
10. How do I modify the instrument's dynamics?
11. What are the MIDI notes?
12. How do I save a custom user kit?
13. After a power off, which parameters are reset to their default values?
14. How do I set up thresholds?
15. How to change a tom/snare RIM sound
16. What are the snare sounds?
17. What does Creative FX mean?
18. What is Player Immersion?
19. How do I calibrate the hi-hat?
20. What are the hi-hat sounds?
21. Can I change the LOOP recording options?
22. What happens if I change the kit while the LOOP is on?
23. How many auxiliary pads I can connect?
24. If I connect two kicks, can I change the sound of each kick?
25. Can I add a second crash?
26. Are all special sounds always available?
27. How can I build a kit with percussion sounds on tom rims?
28. Which drum sticks should I use, wooden or nylon tip?
29. What happens if I change mesh drum heads?
30. “PAD CONFLICT” alert appears on the display
31. “ERROR! MORE THAN ONE PAD FOUND!” alert appears on the display
32. How can I check which firmware version is installed on the Sound Module?