Owner`s manual

1-3
Nº502 Media Console Getting Started
Installation Considerations
The Nº502 Media Console requires special care during installation
to ensure optimal performance. Pay particular attention to
instructions included in this section and to precautions included
throughout this owner’s manual.
Unpacking DO save all packing materials for possible future shipping needs.
DO inspect the Nº502 for signs of damage during shipment. If
damage is discovered, contact your authorized Mark Levinson
dealer for assistance in making appropriate claims.
DO locate and remove the accessory box from the carton. Make
sure it contains all of the items listed in the “What’s in the Box”
table on the previous page. If not, contact your authorized Mark
Levinson dealer.
Placement and
Ventilation
DO install the Nº502 Media Console on its own shelf for proper
ventilation.
DO install the Nº502 chassis on a solid, flat, level surface.
DO install the Nº502 Media Console close to associated
components to keep interconnecting cables as short as possible.
DO select a dry, well-ventilated location out of direct sunlight.
DO allow at least 3 to 4 inches (8 to 10cm) of clearance above the
Media Console for proper heat dissipation.
DO NOT place the Nº502 on a thick rug or carpet or cover the
Nº502 Media Console with a cloth, as this might prevent proper
cooling.
DO NOT expose the Nº502 Media Console to high temperatures,
humidity, steam, smoke, dampness, or excessive dust. Avoid
installing the processor near radiators and other heat-producing
appliances.
DO NOT install the Nº502 near unshielded TV or FM antennas,
cable TV decoders, or other RF-emitting devices that might cause
interference.
DO NOT place the Nº502 on a windowsill or in any location
where it will be exposed to direct sunlight.