Owner`s manual

A-22
Appendix Mark Levinson
Managing the
N
o
502 System
Configurations
1. On the computer, open an Internet Explorer window.
2. In the address line, enter “http://192.168.50.2” and press Enter.
This is the Static IP address of the Nº502, as set up in Step 7 of the
“Setting Up the Nº502” section just completed.
Note An active proxy server may interfere with the configuration download. To
ensure proper download of the Nº502 configuration, turn off the proxy server
while performing the procedure.
3. The Nº502 Internal Web page should now be displayed.
There are three pages, shown as tabs across the top of the screen. The
Home tab is in red text to indicate that it is the current page.
4. Click the Manage System Configurations tab. The tab turns to red text
as the page opens.
5. There are three buttons available on the Manage System Configura-
tions page:
• Save Configuration – saves the Nº502 configuration to the
hard drive of the computer.
• Send Configuration – takes a previously saved configuration
from the computer and loads it onto the Nº502. This downloaded
configuration overwrites any existing configuration settings on
the Nº502. See the “Send Configuration” procedure following this
one for further details.
• Restore Options – restores the factory configuration settings
onto the Nº502, erasing all existing configuration settings.
6. To:
• save the configuration from the Nº502 to the computer, continue
to Step 7.
• send a configuration from the computer to the Nº502, skip ahead
to Step 13.
• restore the factory default settings, skip ahead to Step 18.
Save
Configuration
7. Click the Save Configuration button to save the current Nº502
configuration to the hard drive of the computer. The browser displays
a new page.
8. Right-click on “Download” to save the configuration as directed by
the new page. This action displays the Windows “Save Target As...”
dialog box.
9. Navigate to the desired location and, if needed, change the file name.
Be sure to leave the file name extension intact.