Owner`s manual

1-6
Getting Started Mark Levinson
7. Press the Activity button on the remote control. Verify that the
TV Activity is in red test, indicating that TV is the currently
selected Activity.
8. Put a disc in the DVD player and press the Play button. Once
the disc loads, the DVD media should be visible on the front
panel display. Also confirm that the audio track can be heard
through the front left and right speakers.
Now that the Nº502 Media Console is unpacked and initial
power-up confirmed, it’s time to set up and calibrate the system.
The rest of the manual is designed to help with these steps.
• Chapter 2: Basic Operation reviews the basic functions of
the front and rear panels, remote control, and menu system.
• Chapter 3: Customizing the Nº502 explains how to set up
the Nº502 and discusses advanced user functions such as trigger
outputs, ML Net, and the configuration download utility.
• Chapter 4: Troubleshooting and Maintenance provides a
troubleshooting guide and error message descriptions, as well as
maintenance instructions.
•The Appendix provides Nº502 specifications, menu trees,
rack-mount instructions, and other useful information.
Replacing the Remote Control
Batteries
The Nº502 Media Console remote control has two installed AAA
batteries. These should be replaced as required. We recommend
using alkaline batteries, which are long lasting and do not leak.
To replace the remote control batteries:
1. Locate the battery compartment cover on the bottom of the
remote control.
2. Using a Phillips-head screwdriver, remove the three screws from
the battery compartment cover and set them aside.
3. Remove the battery compartment cover.
4. Remove old batteries.
5. Observing the proper polarity, insert the new batteries.
6. Position the cover over the battery compartment and replace
the screws removed in Step 2.
7. Properly dispose of the old batteries.