Owner`s manual

2-2
Basic Operation Mark Levinson
3. Display
Intensity button
Controls the brightness intensity level of the front panel display and all
LEDs on the front panel. Multiple presses of the Display Intensity button
cycle through the available brightness levels – High, Medium, Low, and
Off.
The Display Intensity button also provides access to the alternative video
output monitor. Refer to the “Monitor Out” description in the “Rear Panel
Overview” section found later in this chapter for more details.
4. Setup button
Accesses the Setup menu to configure all system functions, advanced user
options, and connectivity of the Nº502 Media Console. In addition,
pressing the Setup button from within any menu closes the menu
structure. To set up the Nº502, refer to Chapter 3: Customizing the Nº502.
5. Menu button
Accesses the Main Zone Audio menu to make real-time adjustments to
various audio features of the Nº502. In addition, when the Menu button is
pressed from within any menu, the navigation returns to the previous
menu level.
6. Mute button
Reduces the volume of the audio output within the Main Zone or Remote
Zone. When the Mute function is active, the front panel Mute LED is lit.
To deactivate the Mute control, simply adjust the volume or press the
Mute button until the front panel Mute LED is NOT lit. The actual
volume-level change of the Mute function can be modified in the Setup
menu.
7. Video Profile
button
Accesses the list of available Video Profiles. Multiple presses of the Video
Profile button scrolls through the list; pressing the Enter button loads the
new selection. The loaded Video Profile displays in red text.
8. Audio Profile
button
Accesses the list of available Audio Profiles. Multiple presses of the Audio
Profile button scrolls through the list; pressing the Enter button loads the
new selection. The loaded Audio Profile displays in red text.
9. Surround
button
Accesses the list of available surround modes. Multiple presses of the
Surround button scrolls through the list; pressing the Enter button loads
the new selection. The loaded surround mode displays in red text.
10. Enter button
Has two functions in the menu system:
• to advance through the menus.
• to save a modified parameter value.