Owner`s manual

2-13
Nº502 Media Console Basic Operation
Main Zone Audio
Menu
Accesses the Main Zone Audio menu to perform real-time audio
adjustments to the Main Zone audio outputs. Press the Menu button to
access the Main Zone Audio menu.
The Main Zone Audio menu contains:
• Audio Adjustments menu – makes real-time audio adjustments to
selected audio parameters.
• Surround Mode Adjust menu – makes real-time adjustments to
the available Surround Mode parameters.
Audio Adjustments Menu
The Audio Adjustments menu adjusts the Main Zone volume level by
modifying the offsets, left/right balance, or front/back fader controls. In
addition, you can control the level of Room Correction applied from the
automatic calibration. Changes made to these parameters are system-wide
changes that affect all Activities; the new settings are saved until another
adjustment is made.
The Audio Adjustments parameters are:
• Offsets – adjusts the Offset volume of the Main Zone audio output.
Individual Offsets are available for Stereo Front, Center, Surround,
Back, Subwoofer 1, and Subwoofer 2. Selecting any of the Offset
parameters opens an adjustment bar with a range of Off or –14.0dB to
+14.0dB in 0.1dB increments. The zero Offset value is labeled as
“Even”.
• Left/Right Balance – adjusts the volume level between the left side
speakers and the right side speakers. Selecting the Left/Right Balance
parameter opens an adjustment bar with a range of Off or –14.0dB to
+14.0dB in 0.1dB increments. The zero Left/Right Balance value is
labeled as “Even”.
• Front/Back Fader – adjusts the volume level between the front and
rear speakers. Selecting the Front/Back Fader parameter opens an
adjustment bar with a range of Off or –14.0dB to +14.0dB in 0.1dB
increments. The zero Front/Back Fader value is labeled as “Even”.
• Room Correction – controls the application of the Room
Correction values derived during the automatic calibration. This
parameter can be On or Off.
Note This parameter is not available for selection until the automatic calibration has
been successfully completed.
Conditions that disable Room Correction include:
• Adding a new speaker to an existing Speaker setup. However,
removing a speaker will NOT disable Room Correction.
-AudioAdjustments
Offsets
Left/Right Balance
Front/Back Fader
Room Correction: Off
Room Correction Adjust: Medium
Recall
MainZoneAudio
Audio Adjustments
Surround Mode Adjust