Owner`s manual

2-15
Basic Operation Mark Levinson
Status Panels
Status Panels provide both summary and detailed information regarding
the current state of the Nº502 Media Console. The Status Panels are
information-only pages that have no selectable parameters.
There are two types of Status Panels – the Quick Status Panel and the
Detailed Status Panel. With the exception of the Remote Zone Audio
Quick Status Panel, all Status Panels relate to the Main Zone of the Nº502.
Note Status Panels are not available during calibration.
Quick Status Panel
The Quick Status Panel is displayed whenever the current Activity is
changed via the adjustment menus or the remote control Function
buttons. The Quick Status Panel displays a short summary of the current
Activity, acknowledging the change. The Quick Status Panel can also be
accessed directly by pressing the button.
The Quick Status Panel displays for six seconds, then automatically closes.
This condition and other display characteristics of the Quick Status Panel
can be customized to your preferences. Refer to the “User Options”
section of Chapter 3: Customizing the Nº502 for more information.
The Quick Status Panel identifies the current Activity in the upper left
corner and the current Zone in the upper right corner. All of the variables
listed in the Quick Status Panel are directly related to the status of the Activity
listed in the upper left corner of the panel.
The Quick Status Panel includes:
• Volume - indicates the current volume level
• Signal - identifies the input type of the source signal
• Surround Mode - identifies the current Surround Mode
• Video & Audio Profiles - indicates the current Video & Audio Profiles
The information in the Quick Status Panel varies depending upon the
current Activity and its setup.
The Remote Zone Quick Status Panel is only available for viewing when
the Remote Zone is activated.