Owner`s manual

3-31
Nº502 Media Console Customizing the Nº502
When the Surround Back Processing>DTS-ES parameter is set to:
• Off – DTS-ES decoding is NOT activated, regardless of the input
source.
• On – DTS-ES decoding is always activated.
• Auto – DTS-ES decoding is activated for flagged 5.1-channel DTS-ES
sources. If the incoming source is NOT flagged, then the decoding
remains Off.
The table below shows the behavior of the DTS-ES decoding parameter
conditions.
Dolby Digital
Compression
Reduces wide volume level changes and increases the dialogue
intelligibility at lower listening levels for Dolby Digital input sources.
When set to On, the full compression is applied regardless of the current
volume level. When set to Off, no compression is applied. The Auto
setting provides compression only if the incoming source is formatted
with compression information.
For listening to Dolby Digital input sources at a lower level, set to Auto or
On – this is especially useful for nighttime listening to avoid disturbing
others.
Surround Back
Processing
Parameter Setting
DTS Incoming Source
5.1-Channel DTS 5.1-Channel DTS-ES
(Matrix-Encoded)
6.1-Channel DTS-ES
(Discrete-Encoded)
Auto
DTS DTS ES DTS ES
On
DTS ES DTS ES DTS ES
Off
DTS DTS DTS