Owner`s manual

3-35
Nº502 Media Console Customizing the Nº502
Note PCM 5.1 audio is downmixed to PCM 2.0 audio when using an HDMI
output.
Triggers
The Nº502 provides four triggers that can be used to activate other
devices, such as amplifiers, lights, window shades, and video screens.
The triggers can be activated by selecting a specific Activity or by
taking the Nº502 out of Standby mode.
If activated by an Activity, then the Triggers parameter under the
Activity menu is available for selection. If the Standby option is
selected, then this parameter is grayed out and unavailable. For more
information on triggers and how to set the activation state, refer to the
“Triggers” section found later in this chapter.
Move Activity
Changes the order of the Activity list. Use the  or  buttons to move
the highlighted Activity to a higher or lower position within the
Activity list.
User Options
The User Options Setup menu sets the system preferences. This menu
sets the master Volume and Mute levels, chooses the Status Panel
display settings, restores the factory defaults, and other such system
functions. In addition, system control options, such as trigger outputs
and ML Net, are also accessed and controlled through the User Options
menu.
About
The About page is for information only; it identifies the version
number of the Nº502 operating software. This menu page has no
selectable parameters.
To access the About page, press the Setup button and select the User
Options menu.
Display Options
Setup
The Display Options menu customizes selected front panel and menu
display features on the Nº502. To access the Display Options menu,
press the Setup button and select User Options from the Setup Menu.
The Display Options menu contains:
• Preview – controls where the Activity Preview mode is displayed.
If set to On, then the Activity Preview is viewable on both the front
panel display and the Main Zone displays. If set to Off, then the
Activity Preview is only active on the front panel display. This
option can be turned On or Off; there are no additional settings.
Setup:UserOptions
About
Display Options
Audio Options
Control Options
Lock Options
Restore Options
Setup:UserOptions-Display
Preview
Status Message Time
Main Screen Status
On Screen Display
Menu Background
Front Panel Status
Display Intensity
Speaker Distance Units