Owner`s manual

3-36
Customizing the Nº502 Mark Levinson
• Status Message Time – identifies the amount of time that the
Quick Status Panels are displayed, either 6 Seconds or Always On. This
parameter only applies to the Quick Status Panels; the Detailed Status
Panels remain on-screen until manually closed. Refer to the “Status
Panels” section of Chapter 2: Basic Operation for more information.
• Main Screen Status – determines if the Status Panels are displayed
on the Main Zone display. If set to Off, Status Panels do NOT appear
on the Main Zone display. This option can be turned On or Off; there
are no additional settings.
• On Screen Display – determines if the Nº502 menus, status panels,
and messages are displayed on the Main Zone display. This option can
be turned On or Off; there are no additional settings.
• Menu Background – controls the background of the menus. If the
Menu Background option is set to On, then the menus are overlaid on
whatever is currently playing on the Main Zone display. If the Menu
Background option is set to Off, then the current display output
cannot be viewed while the menu structure is accessed.
• Front Panel Status – determines if the Quick Status Panel is
displayed on the front panel display. If set to Off, the Quick Status
Panel does NOT appear on the front panel display. This option can be
turned On or Off; there are no additional settings.
Note The Detailed Status Panel is always shown on the front panel display. Setting
the Front Panel Status to Off does NOT disable the Detailed Status Panel.
• Display Intensity – controls the brightness intensity level of the
Nº502 front panel display and all LEDs. Selecting this option displays
an adjustment bar with four brightness levels - Off, Low, Medium, and
High. This menu parameter performs the same function as the
Display Intensity button on the front panel.
Note If using the Monitor Out connector on the rear panel instead of the front
panel display, then all front panel display controls affect the Monitor output,
except for the Display Intensity button.
• Speaker Distance Units – identifies the units of measure for all
Speaker Distances. The units of measure can be either feet or meters.
Audio Options
Setup
The Audio Options menu customizes the Master Volume and Mute
controls on the Nº502. To access the Audio Options menu, press the Setup
button and select User Options from the Setup Menu.
All of the volume levels are displayed on a scale of 0.0 (no sound) to 100.0
(extremely loud). All of the Audio Options menu settings affect both the
Main Zone and the Remote Zone volume levels. The Remote Zone master
volume levels are always copied from the Main Zone.
:UserOptions:AudioOptions
Power On Volume
Max Volume
Mute Level
Remote Zone Volume
Multi-Channel Input Gain