Owner`s manual
3-39
Nº502 Media Console Customizing the Nº502
functions that are available in both Activity mode and Setup mode can be
assigned to a remote function button.
Note Since using a function key bypasses menu path navigation, the cursor always
highlights the top of the menu list, not the last-selected menu item.
To Set a Remote Function Button:
1. Press the Setup button.
2. Use the or buttons to select User Options and then press the
Enter button.
3. Select Control Options and then press the Enter button.
4. Select the Remote Function option to be set and then press the Enter
button.
The status of each Remote Function button is also displayed. At the
factory default state, each of the Remote Function buttons should
display “Unassigned”.
5. Select the category for the command that the Function button will
control and then press the Enter button.
6. Highlight the desired command and press the Enter button. If another
command has been previously chosen or is set to one of the other
Function buttons, it will be highlighted in red.
Once a command is selected, the menu returns to the category page,
and the red cursor now highlights the category of the newly selected
command.
7. Press the button to return to the Control Options menu. Note that
the status of the Function button just set should identify the new
command selected.
In some cases, the function that you want to assign may be part of a
multiple-choice list. When the Function button is selected, a pop-up
window appears on the display. Multiple presses of the Function button
scrolls through the list. When you stop scrolling, that parameter
automatically loads and the pop-up window closes.
Network Setup
To setup the Nº502 for network operation via the Ethernet port, first
update the Network Setup menu.
The Network Setup menu has several parameters:
• Host Name – indicates the network name given to the Nº502. The
default name is “ML502”. Selecting this parameter opens the Name
-ControlOptions-NetworkSetup
Host Name
DHCP
Auto IP Address
Renew IP
Static IP Address
Subnet Mask