Owner`s manual

4-9
Nº502 Media Console Troubleshooting & Maintenance
Please Save with New
Name
This error message displays when the Save button is pressed in the
Name Selector, but the Name Line is blank. The Name Selector will
not perform the Save function when the Name Line is blank.
To correct the problem, enter a name onto the Name Line before
selecting the Save button.
Power Failure
If the Nº502 experiences a power failure condition, the front panel
LEDs indicate the failure upon power up. When the Nº502 is able to
power up, the LEDs flash continuously between Off and full bright,
regardless of the Display Intensity setting.
Room Correction is
Not Available
This error message displays when the Room Correction control is
accessed and the Nº502 has not yet been calibrated. The Room
Correction control cannot be activated until the Automatic
Calibration has been successfully completed.
To correct the problem, perform the Automatic Calibration.
Room Correction
Adjust is Not Available
This error message displays when the Room Correction Adjust
control is accessed and the Nº502 has not yet been calibrated. The
Room Correction Adjust control cannot be activated until the
Automatic Calibration has been successfully completed.
To correct the problem, perform the Automatic Calibration.
Note The Room Correction Adjust parameter is also not available when the
Room Correction parameter is set to No. However, this condition does
not prompt an error message.
Setup Locked/
Surround Locked
This message displays when a locked parameter is accessed through a
remote function key. To access the parameter, the lock needs to be
removed. Go to the Setup:User Options-Lock Options menu to
remove the lock.
Speaker Not Available
This message displays when a speaker Offset parameter is accessed
that is not part of the current Speaker Setup. The speaker Offset
adjustments can only be made to speakers that exist in the current
Speaker Setup.