User Manual

12
N
0
5302 POWER AMPLIFIER / OWNER’S MANUAL
BROWSER SETUP PAGE (BSP)
The BSP is a highly convenient means of selecting the
Standby mode, keeping the firmware of your amplifier up to
date, and monitoring operational faults and parameters. It is
accessed via an up-to-date web browser on a PC or tablet.
In order to access the BSP, you must first connect the unit to
your Local Area Network (LAN). Connect the Ethernet port
on the rear panel of the N
0
5302 to an Ethernet port on your
home network’s router, switch or hub with a Category 5e or
Category 6 Ethernet cable.
Connect a USB flash drive to the N
0
5302’s USB port for 15
seconds and remove it. The amplifier’s software will write
two files on the drive: a .txt file with the unit’s IP address, and
an index.html file.
Insert the flash drive into the PC connected to the N
0
5302,
open the text file and write the IP address here for future
reference:
IP Address:__________________________________
Open a web browser and copy the IP address into the address
field. The BSP will open in your browser. Bookmark the IP
address for easy future access.
Alternatively, simply click the index.html file to open the BSP
in your browser.
CONTROL