User Manual

7
N
0
585 / N
0
585.5 INTEGRATED AMPLIFIER / OWNER’S MANUAL
ENGLISH
SETUP MENU
The Power Management parameters let you customize power-
related functions.
Standby: This setting lets you set the Standby mode to one of
the following options:
Green: This mode removes power from almost all of the
N
0
585’s circuits, allowing the unit to be activated only via
an IR control signal, a 5V – 12V trigger voltage or a press of
the Standby button. This mode provides maximum power
conservation and is the factory-default Standby mode.
Power Save: This mode removes power from the N
0
585’s
audio circuits, but keeps the control circuitry powered and
ready to receive commands from either the front-panel
controls or the remote control. This mode provides moderate
power conservation.
Normal: This mode shuts off the N
0
585’s display and mutes
its audio outputs, but keeps all of its control and audio circuits
powered. This mode provides the least amount of power
conservation but allows the N
0
585’s audio circuits to remain
warmed up to deliver optimal performance at all times.
Auto Off: This setting lets you engage or disengage the
Auto Off function, which puts your N
0
585 into the Standby mode
after 20 minutes of inactivity (no audio signal, and no user-
control input).
Display: This menu gives you access to the following display-
related parameters:
Intensity: Lets you set the brightness of your N
0
585’s display
and front-panel LEDs to High, Med, Low, or Off (which turns
the display and LEDs off entirely until a control is operated).
The factory default setting is High.
Timer (only applies when the display intensity is set to Off):
Lets you choose how long the display and LEDs remain lit
after the last time a control is operated. Choose from 10
seconds, 4 seconds, or 2 seconds. The factory default setting
is 10 seconds.
POWER MANAGEMENT
Power Mgmt
Standby=XXX
AutoOff=XXX
Display=XXX
Setup Menu
Input Setup
Power Mgmt
Volume Control
Advanced
Output