N 5909 0 HEADPHONE OWNER’S MANUAL
TABLE OF CONTENTS TABLE OF CONTENTS Overview 3 What's in the Box 3 Product Overview 4 Adjustability, Fit & Comfort 5 Functions 6 Charge 8 Connections 9 Pairing 9 Passive 9 USB Digital Direct 10 APP 11 Maintenance / Care 12 Changing / Removing Earpads 12 Accessories 13 Troubleshooting 14 Ear Health 15 Specifications 16 Warranty 17 N05909 HEADPHONE / OWNER’S MANUAL 1
2 N05909 HEAPHONE / OWNER’S MANUAL
OVERVIEW OVERVIEW Congratulations on your selection of the Mark Levinson® No 5909 Premium Wireless ANC Headphone. For over 50 years, discerning individuals have chosen Mark Levinson products for their luxurious quality and revealing sound. Robust materials, lavish finishes, bold geometry, and outstanding performance are celebrated attributes of the Mark Levinson brand.
OVERVIEW 1 2 5 3 6 4 PRODUCT OVERVIEW 1. Premium Leather Headband with Memory Foam Interior 2. Replaceable Memory Foam and Memory Foam Ear Pads 3. Forged and Machined Aluminum Components throughout 4. USB-C Input for Passive Audio Listenting & Charging 5. Adjustment Arm 6.
ADJUSTABILITY, FIT & COMFORT ADJUSTABILITY, FIT & COMFORT Adjust to find optimal fit Rotates for comfort around neck N05909 HEADPHONE / OWNER’S MANUAL 5
FUNCTIONS FUNCTIONS Active Noise Cancelling / Awareness (ANC) Button Bluetooth Pairing/ Power ON/OFF Pairing Indicator Active Noise Cancelling / Awareness (ANC) Button x1: ANC ON (Delfault selectable via app; HIGH, ADAPTIVE, LOW modes) x2: Awareness ON (Default selectable via app; Voice Pass or Ambient modes) x3: Passive / ANC OFF Clicking the button will cycle through the different modes.
FUNCTIONS Vol + Play/Pause / Answer/End Call Vol - Battery Level Indicator USB-C Charging Port Play/Pause / Answer/End Call USB-C Charging Port x2: Skip Forward Fully Charged x3: Skip Back Charging HOLD: Voice Assistant Battery Level Indicator High Battery Med Battery Low Battery N05909 HEADPHONE / OWNER’S MANUAL 7
CHARGE CHARGE Press and hold (>1 second) ON/OFF button to power ON.
CONNECTIONS CONNECTIONS PAIRING The first time you power ON your headphones they will enter pairing mode. Simply connect through the Bluetooth menu on your device and select Nº5909. To manually activate pairing mode, power headphones OFF, then hold ON/OFF button for 4 or more seconds. Pairing to 2 or More Devices 1. Enter pairing mode and connect to device 1. 2. Enter pairing mode again and device 1 will disconnect. 3. Connect to device 2 and turn headphone off. 4.
CONNECTIONS CONNECTIONS USB DIGITAL DIRECT The № 5909 can be connected and used to listen to content via USB Digital Direct using the standard USB-C to USB-C charging cable included. 1. Plug one end of the USB-C to USB-C cable directly into one of your computer's USB connections (use the included USB-C to USB-A adaptor if needed). 2. Plug the other end of the USB-C cable into the USB-C input on the right ear cup of the headphone. 3.
APP APP The Mark Levinson Headphones app allows you to choose your listening preference and select Active Noise Cancellation and Awareness modes. Select Bass Contour settings, Set on-head detection and auto time-off parameters.
MAINTENANCE / CARE / CHANGING / REMOVING EARPADS MAINTENANCE / CARE Clean ear pads and headphones with soft, slightly damp cloth. Do not soak, submerge or allow moisture to enter near the drivers or cable jacks. Ear pads and cables can be purchased if they are worn out at: www.marklevinson.com Polishing cloth can be used to wipe down after use / remove finger prints, etc. . . Do not drop, sit on, or allow the headphones to be exposed to water, moisture, or temperature extremes.
ACCESSORIES ACCESSORIES Travel Storage Case USB-C to USB-C Charging Cable USB-C to USB-A Charging adaptor USB-C to 3.5mm Proprietary Audio Cable (Both 1.25mm and 4mm Audio Cables included) 3.5mm to 6.
TROUBLESHOOTING TROUBLESHOOTING TROUBLE PAIRING HEADPHONES AND DEVICE THE HEADPHONES AND DEVICE DO NOT PAIR: 1. Make sure the headphones are not connected to the charger. Cycle power switch OFF and ON. 2. Turn the Bluetooth OFF, then on again on the source device. 3. Turn OFF the Bluetooth feature on any other device that is paired with the headphones. 4. Hold power button down >4 seconds to enter pairing mode. 5.
EAR HEALTH EAR HEALTH Our ability to hear is amazing. The Mark Levinson team wishes you to treat your ears like the precious tools they are so they will continue to provide you a lifetime of incredible sonic experiences. In general, do not listen “too loud or for too long,” and be attentive to your own ears. Ringing, discomfort, or sensitivity to high frequencies and treble may be a signal from your ears that you are pushing them to their limits and causing irreparable damage.
SPECIFICATIONS SPECIFICATIONS GENERAL Type: Premium High-Resolution Over-the-Ear Wireless Adaptive ANC Noise Cancelling Headphone Driver Size: 40mm Beryllium Driver Frequency Response (Passive): 10Hz - 40kHz Frequency Response (Active): 20Hz - 20kHz Sensitivity: 97dB SPL @1kHz/1mW Maximum SPL: 98dB Maximum Input Power (Passive): 100mW Microphone Sensitivity: -32dBV @ 1kHz/Pa Impedance: 32 ohm Bluetooth Transmitted Power: <8dbm Bluetooth Transmitted Modulation: GFSK, π/4 DQPSK / 8DPSK
WARRANTY WARRANTY Harman International Industries, Incorporated (“Harman”) warrants to you that your Mark Levinson product will be free from defects in workmanship and materials for a corresponding period set forth in the Mark Levinson Limited Warranty.
HARMAN International Industries, Incorporated 8500 Balboa Boulevard Northridge, CA 91329 USA © 2020 HARMAN International Industries, Incorporated. All rights reserved. Mark Levinson is a registered trademark of HARMAN International Industries, Incorporated. Other company and product names may be trademarks of the respective companies with which they are associated. "MQA" is a trade mark of MQA Limited © 2018.
