- N326S Preamplifier Owner's Manual

2-17
Nº326S Preamplifier Basic Operation
4. enter button
Selects and deselects menu items when the setup menu is
open. The enter button performs no function during normal
operation.
5. volume ± buttons
Adjust master volume level. Pressing the volume ± buttons
increases (+) and decreases (–) master volume level in 1.0dB
increments up to 23.0dB and in 0.1dB increments above
23.0dB. The minimum master volume level setting is OFF. The
MaxVol parameter can be used to determine the maximum
master volume level setting in 0.1dB increments between
40.0dB and 80.0dB. The factory-default maximum master vol-
ume level is 80.0dB.
The Offset parameter can be used to determine individual
input volume level offsets in 0.1dB increments between
–20.0dB and +20.0dB. The factory-default input volume level
offset is 0.0dB. Whenever an input is selected, the Nº326S auto-
matically applies the Offset parameter setting to master vol-
ume level.
Note the following about using the volume ± buttons:
•Pressing and releasing the volume ± buttons accommodates
fine, precise adjustments.
•Pressing and holding the volume ± buttons for longer than
1.5 seconds accelerates the rate of change to accommodate
large adjustments.
Note
• The master volume control does not affect record output
levels.
• All Nº326S volume controls, including master volume
and balance, are deactivated when SSP mode (page 4-8)
is activated.
6. select ± buttons
Select the desired input. Pressing the select ± buttons scrolls
through all activated inputs. The front panel display indicates
the name and volume level of the selected input. Select ±
button scrolling does not include deactivated inputs – inputs
for which the Name parameter has been set to unused.