Owner`s manual

5-62
Menu System Mark Levinson
The following operations are available to complete editing the
name:
• INSERT Adds a space at the cursor position
• DEL Deletes the current cursor position
• CLEAR Clears the entire Name Line
• CAP Toggles the characters between capital and small letters
• SAVE Saves the current Name Line and returns to the menu
• QUIT Returns to the menu without saving the Name Line
• ––> Moves the cursor one space to the right
• <–– Moves the cursor one space to the left.
4. Repeat step 3 as needed to complete the name.
5. To end the editing session, use the save or quit operations. The
menu button also quits.
All installed RZones have the same options, and you will see menu
listings only for those RZones that are actually installed. We will
review only the menu for the first RZone, since the others would be
identical.
Type
There are three possibilities for RZone type:
• NTSC Video is used for audio/video zones (either record or
remote) that will be used with NTSC video signals. This setting
establishes the format of the independently-generated on-
screen display used for this particular zone.
• PAL Video is used for audio/video zones (either record or
remote) that will be used with PAL video signals. This setting
establishes the format of the independently-generated on-
screen display used for this particular zone.
• Audio Only is used for zones that do not include any video, and
disengages the video portion of the RZone, since it serves no
purpose in an audio-only zone.
Audio Output
This RZone option determines the nature of the audio outputs asso-
ciated with this RZone, which depends on how you plan to use it.
Variable provides volume-controlled outputs (both analog and
PCM digital) that are most appropriate for remote zone applica-
tions. It can be controlled via the zone IR input, or by RS-232
commands issued to that RZone.
Fixed provides a line-level analog signal and a digital signal that is
generally appropriate for record zone applications. In this setting,
you cannot control the volume of the analog and digital outputs.