Quick Start Guide

10
N
0
5101 STREAMING SACD PLAYER/DAC / QUICK START GUIDE
CONTROL
The N
0
5101 is highly flexible and allows a variety of means of
setup and control including front panel buttons, IR remote as
well as IP (Ethernet) and RS-232 for integration with 3rd party
control systems. In addition it can be controlled from a phone
or tablet with the
Mark Levinson 5Kontrol mobile application.
The
Settings menu allows you to configure all aspects of your
N
0
5101 . This section will go through the menu items and explain
their function.
For more details visit www.marklevinson.com.
Entering the settings menu
To access the Settings menu, press the Home button to go
to the home screen. Press ▲ to scroll to the
Settings menu
item and press Enter. The top line on the display should read
Settings menu.
Navigating the menus
The menus can be navigated by using the cursor (arrow) keys on
the remote control.
1. Use the ▲ and ▼ keys to navigate up and down the current
menu.
2. With the main section you require displayed, press Enter
to select it.
3. Use the ▲ and ▼ keys to navigate up and down the options.
4. Pressing
▲
selects a setting: use the ▲ and ▼ keys to
change the setting.
5. Press Enter to confirm the setting. Go back to step 4 to
adjust any other settings in the current section.
6. Press
▲ to return to the previous screen if you want to
select another section to adjust.
Network Setup
This item allows the user to configure the unit to join an existing
network via Ethernet or WiFi. This is required for network audio
playback and OTA software updates. It is recommended that you
use the "Auto" method for the easiest set up.
For WiFi auto set up:
1. Select
WiFi under the Select Interface menu.
2. Press Enter.
1. Select
Scan under the Wireless menu.
2. Press Enter and the unit will scan for available networks.
3. Use ▼ key to scroll and find the network of choice.
4. Press Enter to select the network. You will be prompted
to Enter Password.
5. Use navigation controls to enter the network password:
▲ and ▼ to scroll though characters.
▲
and ▲ to move to the next/previous character.
6. Press Enter when password is complete.
7. For Ethernet select
Ethernet under the Select Interface
menu. Press Enter, and then Enter again. Follow the
prompts.
For Ethernet auto set up:
1. Make sure a router with DHCP is connected.
2. Select
Ethernet under the Select Interface menu.
3. Press the Enter key. The display should read
DHCP On
(Auto)
.
4. Press the Enter key again, and the display should read:
Connecting. Please Wait .
5. Once connected, the display should read:
Connected .
6.
Press Enter.
CONTROL