N'32 owner's Manual

(closeup)

13. Remove your ESD wrist strap from the chassi and from your

wrist.

It would hinder your replacing the top cover, next.

14. Replace Nº32 preamp top cover and screws (

⁄32” hex key)

When replacing the top cover, note the guide pins at the bottom

edges as well as the top “key” you noticed before. All three must be

lined up before you slide the top cover forward, flush with the

front panel.

15. Reconnect the DC interface cables and restore power to the

Controller (if you powered it down earlier)

Congratulations! The new phono inputs will automatically ap-

pear as available input selections.