v.13.december.
SAFETY INSTRUCTIONS 1.
A Word from Marco De Virgiliis MARK VISION Thank you for choosing DV Mark! We are very excited to have you join us for an exciting new chapter in the history of guitar amplification. In less than 10 years, we have succeeded in making Markbass the world’s leading bass amp brand, using technology to better serve the needs of bassists: great tone, reliability, versatility/flexibility, and light weight.
FRONT PANEL PANNELLO FRONTALE 1) INPUT Connect your guitar to this input using a standard ¼” shielded instrument cable. 2) PAD This switch pads the input (1) at -6dB, 0dB, +6dB, or +12dB to compensate for higher output sources, such as guitars with high-output pickups or active electronics. 3) Ch1 Ch2 Ch3 Push these buttons to select the models of AMP’s for each slot. 4) SPEAKER This button allows to have quick access to the Cabinet Simulator parameters.
REAR PANEL PANNELLO POSTERIORE 26) AC SOCKET Connection for the power cord. This location also houses the main fuse of the unit.. 27/28) These speaker outs provide power outputs for Left and Right channels (stereo mode) to speaker cabinets. Do not connect these outputs to a load of less than 4 ohms! 29) BRIDGE This speakon out is used when using the Multiamp power amp in mono-bridge mode.
MULTIAMP OVERVIEW IMPOSTAZIONE MULTIAMP Connections The Multiamp can be connected in many modes to fit the needs of each musician. Collegamenti Il Multiamp puo’ essere collegato in diverse modalita’ per poter essere sfruttato a seconda delle esigenze di ciascun musicista. MONO CONNECTION BRIDGE output on the rear panel. This output gives 500W@8ohm or 300W@16ohm power (Do not connect this output to a load of less than 8 ohms!) STEREO CONNECTION LEFT and RIGHT SPEAKER OUT on the rear panel.
IMPOSTAZIONE MULTIAMP MULTIAMP OVERVIEW SLOT The SLOTs are the locations where you can put the AMP models or effects.Each Multiamp PRESET contains 8 SLOTs. You can create the signal routing by putting an AMP and the effects in these locations as you like and need. You can also make a chain by adding the effects before or after the AMP, and thanks to the LOOP Send and Return, add an outboard effect processors or pedals in serial or parallel and in the chain point wherever you like.
IMPOSTAZIONE MULTIAMP MULTIAMP OVERVIEW The available AMP models for each channel are: Gli AMP disponibili per ogni canale sono: Triple 6 CH1 CH 1 DARKFACE ‘65 (US) RECTO (US) CH1 BASSFACE ’59 (US) SloDrive (US) XTC CH1 Triple 6 CH1 CH 1 DARKFACE ‘65 (US) RECTO (US) CH1 BASSFACE ’59 (US) SloDrive (US) XTC CH1 CH 2 Triple 6 CH2 TOP 30 (UK) SloDrive (US) Rock ’75 (UK) XTC CH2 CH 2 Triple 6 CH2 TOP 30 (UK) SloDrive (US) Rock ’75 (UK) XTC CH2 CH 3
MULTIAMP OVERVIEW HOW TO CREATE A SOUND Choose the connection mode (LIVE with mono cab or STEREO or P.A./studio). Set the input level pressing the PAD button and select the right dB value. In most cases 0db is the right level. Press EXIT to go back from the PAD function. It would be preferable to have in mind the kind of sound and effect routing you’d like to obtain so you can put effects and amp in the right chain’s location.
IMPOSTAZIONE MULTIAMP MULTIAMP OVERVIEW STORE A SOUND Now that we have created our sound we can name it and memorize it in one of the USERS Banks, as following: Press STORE button, the BANK menu will appear, select an USERS bank and press ENTER. Choose the preset location number where you want to store it and press ENTER again. Now you can name it with alphanumeric characters using the VALUE control (up to 10 characters).
IMPOSTAZIONE MULTIAMP MULTIAMP OVERVIEW SD CARD By using an SD CARD you can recall a whole BANK of items, memorize a BANK and import/export a single PRESET. Select SYSTEM to go to the SD CARD menu. Press ENTER and the System SETTING menu will appear. Select the file, press ENTER and choose the desired operation. Press ENTER to recall or import an item or a BANK.. SD CARD Tramite una SD CARD e’ possibile richiamare un intero BANCO di suoni, memorizzare un BANCO e importare o esportare un singolo PRESET.
TECHNICAL SPECS Channels: Three Controls: Gain - Level - Presence - Master EQ Controls: Low - Mid - High Speaker Outputs: Input . . . . . . . .Two ¼” Jack mono out 4/16 ohm . . . . . . . .One Neutrik Speakon/¼” Jack Combo BRIDGE out 8/16 ohm Power Output: 250W + 250W @ 4ohm, 150W + 150W @ 8ohm, 85W + 85W @ 16 ohm; 500W@8ohm, 300W@16ohm (BRIDGE mode) SD CARD Other Features: . . . . . . . .Virtual amps . . . . . . . .Speaker cabs and microphones . . . . . . . .Effects . . . . . . . .
LIMITED WARRANTY 13
WARRANTY CARD 14
NOTE 15
Product specifications are subject to change without notice TM www.markbass.it TM www.momark.it www.markaudio.it srl Italy - 66020 San Giovanni Teatino CH - Via Po, 52 Tel: +39 0854407764 / 0854465705 - Fax: +39 0854407764 / 0854407399 - www.dvmark.it - info@dvmark.
