v. 26.march.
1. IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions; 2) Keep these instructions; 3) Heed all warnings; 4) Follow all instructions; 5) Do not use this apparatus near water; 6) Clean only with dry cloth; 7) Do not block any ventilation openings.
2. LITTLE MARK III / LITTLE MARK 250 / LITTLE MARK 800 / COMBO HEAD II FRONT PaneL 3.
5. LITTLE MARK III / LITTLE MARK 250 / LITTLE MARK 800 / COMBO HEAD II Technical Details INPUTS INPUT BALANCED RETURN EFFECT CONTROLS GAIN LINE OUT PRE/POST EQ (for line out) GROUND LIFT MASTER VOLUME impedance: 500 Kohm, max. voltage: 15 Vpp impedance: 100 Kohm, max. voltage: 25 Vpp impedance: 33 Kohm, max.
6. COMBOS: TECHNICAL DETAILS COMBO SERIES CMD 102P CMD 103H MINI CMD 121P CMD 121H MINI CMD 151P CMD 151P JEFF BERLIN CMD JB PLAYER SCHOOL Speaker Size (inches) 2x10” 3x10” 1x12” 1x12” 1x15” 1x15” 1x15” Tweeter Piezo Tweeter 1” HF Comp. Driver Piezo Tweeter 1” HF Comp. Driver Piezo Tweeter None None Crossover Frequency 3.5 kHz 3.5 kHz 3.5 kHz 3.5 kHz 3.
7. LITTLE MARK TUBE / LITTLE MARK TUBE 800 Technical Details INPUTS INPUT 1 INPUT 2 RETURN EFFECT CONTROLS GAIN 1 GAIN 2 LINE OUT PRE/POST EQ (for line out) GROUND LIFT MUTE MASTER VOLUME impedance: 500 Kohm, max. voltage: 15 Vpp balanced XLR, impedance: 500 Kohm, max. voltage: 15 Vpp impedance: 33 Kohm, max.
8. TROUBLESHOOTING TIPS THERMAL PROTECTION SYMPTOM The amp gets hot and shuts down. PROBABLE CAUSE The amp has overheated, either as a result of inadequate ventilation or a damaged cooling system fan. When the amplifier cools down to a safe level, the amp will automatically restart. SUGGESTIONS Please verify that the fan is working properly, and that the cooling system ports are not obstructed. CURRENT PROTECTION SYMPTOM The amp turns on, but there is no signal coming from the speaker/s.
Product specifications are subject to change without notice Italy - 66020 San Giovanni Teatino (Ch) - Via Po, 52 - Tel. +39 085 446 3755 - Fax +39 085 440 7764 www.markbass.it - info@markbass.
