v. 15.march.
1. IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions; 2) Keep these instructions; 3) Heed all warnings; 4) Follow all instructions; 5) Do not use this apparatus near water; 6) Clean only with dry cloth; 7) Do not block any ventilation openings.
2.CONTENTS Introduction 3 Functions overview (front panel) 4 Connections (rear panel) 5 Technical specs 6 Block diagram 6 3. INTRODUCTION Congratulations on your purchase of the MB 1000 power amp! The MB 1000 is designed to provide the greatest flexibility with the highest reliability. We are very proud of the high quality standard that we’re able to offer thanks to our 100% Made in Italy production, state-of the-art testing and quality control facilities, and top-quality components.
. FUNCTIONS OVERVIEW (FRONT PANEL) LEVEL left (1) – This controls the volume level of the left channel. In Bridge mode this is the master level. LEVEL right (2) – This controls the volume level of the right channel. In Bridge mode this is disabled. CLIP (3) (4) – The Clip LED allows you to set the optimal gain level of your signal so that you can avoid degradation of your signal quality. To find the optimal level, back off the MB 1000 power amp level so that the LED rarely turns on.
INPUT left (11) - This XLR input provides an input to the Left Channel from the output of your preamp or the last device in your effects chain. This connection is used as the input connection when operating the MB 1000 power amp in Bridge mode. INPUT right (12) - This XLR input provides an input to the Right Channel from the output of your preamp or the last device in your effects chain. Use this input and Left Channel balanced input when running in stereo.
7. BLOCK DIAGRAM 6.
Product specifications are subject to change without notice Italy - 66020 San Giovanni Teatino (Ch) - Via Po, 52 - Tel. +39 085 446 3755 - Fax +39 085 440 7764 www.markbass.it - info@markbass.
