User Manual

06
6. CMD SUPER COMBO K1 TECHNICAL DETAILS
INPUT
INPUT impedance: 500 Kohm, max. voltage: 15 Vpp
RETURN EFFECT impedance: 33 Kohm, max. voltage: 10 Vpp
CONTROLS
GAIN –60 dB to +23 dB range
LINE OUT level control on front panel
PRE/POST EQ (for line out) switch on rear panel
GROUND LIFT switch on rear panel
MASTER VOLUME
EQUALIZATION
LOW center frequency 60 Hz; level: ±16 dB
MID LOW center frequency 360 Hz; level: ±16 dB
MID HIGH center frequency 800 Hz; level: ±16 dB
HIGH center frequency 5 kHz; level: ±16 dB
VPF (Variable Pre-shape Filter) center frequency 380 Hz (cut)
OUTPUTS
SEND EFFECTS unbalanced, max. voltage 20 Vpp
TUNER OUT unbalanced, max. voltage 2 Vpp
LINE OUT balanced XLR, max. voltage 20 Vpp
SPEAKER OUTS speakon
OTHER
HEIGHT 14.76 in. / 374.9 mm
WIDTH 17.32 in. / 439.9 mm
DEPTH 27.17 in. / 690.1 mm
WEIGHT 59.75 lbs / 27.1 kg
OUTPUT POWER 1000W RMS @ 4 ohm, 600W RMS @ 8 ohm
XOVER FREQUENCY: 1.5 kHz; 5.5Khz
FREQUENCY RESPONSE: 40 Hz to 20 kHz
SENSITIVITY: 99 dB SPL
WOOFER: 12” Markbass Custom (800W RMS)
MIDRANGE: 5” MID Markbass Custom
TWEETER: 1” compression driver with Markbass custom horn
POWER REQUIREMENT 100V; 120V; 230V; 240V 50/60Hz
(Voltage is factory preset according to region of sale).
Markbass amps/combos are manufactured to be sold and used in the country of purchase, and
are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be
changed.
FUSE
EUROPE 8 A 250V T 5x20
AUSTRALIA/UK 8 A 250V T 5x20
USA/CANADA 10 A 250V T 5x20
JAPAN 12 A 250VT 5x20