Specifications

4
INSTALLATION
Service Connections
8100 & 8192 STANDARD DEPTH OVENS
Figure 1
SERVICE CONNECTIONS
G Gas Connection - 3/4” (20mm) N.P.T. on the right hand
rear of the appliance.
Gas Pressure:
 Natural Gas- 5” W.C.
 Propane - 10” W.C.
The pressure regulator (supplied) is to be connected by the
installer.
Specify type of gas and altitude if over 2,000 feet, when ordering.
Oven Interior Dimensions: 24” High x 29” Wide x 22-1/2” Deep
(61mm High x 737mm Wide x 572mm Deep)
Electrical Requirements: 120 VAC, 50-60 Hz, 1 Phase. Provided
with a 6 foot power cord fitted with a standard three prong ground
plug.
Installation Clearance: When installing ovens against combusti-
ble surfaces (rear or side walls) 6” (152mm) clearance is required.
When installing ovens against non-combustable surfaces (rear or
side walls) 0” clearance is required.
2 [51]
G
37.75
[959]
135°
29 [737]
22.5
[572]
MODEL 8100 MODEL 8192
DIMENSIONS ARE IN INCHES [MM]
2 [51]
G
37.75
[959]
135°
29 [737]
22.5
[572]
38 [965]
G
34
[864]
28
[711]
62
[1575]
40.25 [1022]
24
[610]
G
2.5
[64]
28
[711]
30.5
[775]
G
34
[864]
34
[864]
6 [152]
74
[1880]
40.25 [1022]
24
[610]
24
[610]
G
2.5
[64]
6 [152]