Specifications

PRODUCT
BT(v4.2) &
WLAN(802.11a/b/
g/n/ac) 2.4G
SISO/5G MIMO
SPECIFICATION
MODEL NAME :
6세대 BT/wifi Combo Module
MODEL CODE A000010007A
Product Specification
8. General Features
8.3 WLAN
1) WLAN RF band & modulation Features
• Dual-band 2.4GHz and 5GHz 802.11 a/b/g/n/ac(802.11ac compliant)
• Up to 866Mbps data rate
• Supports 20, 40 and 80MHz channels with optional SGI(256 QAM modulation)
• Tx and Rx low-density parity check(LDPC)
• Supports IEEE 802.11ac/n beamforming
• Supports PCIe v3.0-compliant interface running at GEN1 speeds
• Supports two antennas with Bluetooth/5G WLAN and 2.4G/5G WLAN antenna
• Supports standard SDIO V3.0 (up to SDR104 mode at 208MHz, 4-bit and 1-bit)
• Backward compatibility with SDIO v2.0 host interface
• WPA and WPA2(Personal) support for powerful encryption and authentication
• AES and TKIP in hardware for faster data encryption and IEEE 802.11i compatibility
• Reference WLAN subsystem provides Wi-Fi protected Setup(WPS)
2) WLAN MAC features
• Enhanced MAC for supporting IEEE 802.11ac features
• Transmission and reception of aggregated MPDUs(A-MPDU) for high throughput(HT)
• Support for power management schemes, including WMM power-save
multi-poll(PSMP) and multiphase PSMP operation
• Support for immediate ACK and block-ACK policies
• Inter-frame space timing support, including RIFS
• Back-off counters in hardware for supporting multiple priorities as specified in the
WMM specification
• Timing synchronization function(TSF), network allocation vector(NAV) maintenance,
and target beacon transmission time(TBTT) generation in hardware
• Hardware offload for AES-CCMP, legacy WPA TKIP, legacy WEP ciphers, WAPI,
and support for key management
• Programmable independent basic service set(IBSS) or infrastructure basic service
set functionality