Specifications

ManualsBrandsMarley Engineered Products ManualsFan768IC

BENTON ELECTRIC, INC.

GET CONNECTED

SINCE 1967 CCB#4213 VOICE 541.967.1244 EMAIL@BENTONELECTRIC.COM

Jefferson Public Works

Shop Building 2011

701 N Second Street

City of Jefferson, Oregon

Electrical Equipment

Operation and Maintenance

Manuals

ProvidedBy:BentonElectric,Inc.

July, 2011 – January, 2012

Summary of content (141 pages)

PAGE 1
BENTON ELECTRIC, INC. SINCE 1967 CCB#4213 GET CONNECTED VOICE 541.967.1244 EMAIL@BENTONELECTRIC.COM Jefferson Public Works Shop Building 2011 701 N Second Street City of Jefferson, Oregon Electrical Equipment Operation and Maintenance Manuals Provided By: Benton Electric, Inc.
PAGE 2
BENTON ELECTRIC, INC. SINCE 1967 CCB#4213 GET CONNECTED VOICE 541.967.1244 EMAIL@BENTONELECTRIC.COM Jefferson Public Works Shop Building 2011 Table of Contents 16000 – Electrical 16440 ...................................... Panelboards .............................................. 3 Specific Information ....................................... 4 Brochures .............................................. 10 Panel 4 Manual ......................................... 16 Panel 5 Manual ........................
PAGE 3
BENTON ELECTRIC, INC. GET CONNECTED V.541.967.1244 F.541.967.8257 email@bentonelectric.
PAGE 4
PANEL 4 Jefferson Shop Building Electrical Equipment O&M Manual Page 4 of 141
PAGE 5
Jefferson Shop Building Electrical Equipment O&M Manual Page 5 of 141
PAGE 6
Jefferson Shop Building Electrical Equipment O&M Manual Page 6 of 141
PAGE 7
PANEL 5 Jefferson Shop Building Electrical Equipment O&M Manual Page 7 of 141
PAGE 8
Jefferson Shop Building Electrical Equipment O&M Manual Page 8 of 141
PAGE 9
Jefferson Shop Building Electrical Equipment O&M Manual Page 9 of 141
PAGE 10
NQ, NF, I-Line® and QMB Panelboard Products Reliable,Versatile and Convenient Solutions Jefferson Shop Building Electrical Equipment O&M Manual Page 10 of 141
PAGE 11
Square D Panelboard Family ® Developed with customer input, Square D panelboards are built to last, featuring design innovations that make these products easy to install. Supported by the largest distribution, sales and service organization in the industry, Square D panelboards are readily available to meet the needs of contractors, consultants and end-users. Application Commercial Industrial O.E.M.
PAGE 12
NQ and NF Lighting Panelboards The NF and NQ families of lighting panelboards have been redesigned to meet the evolving needs of our customers. Easier to install, improved availability and greater installation flexibility all combine to make these panels state of the art in lighting panelboards.
PAGE 13
NQ Lighting Panelboards PANEL 5 Developed with electrical contractor input, the NQ family of lighting and appliance panelboards sets new standards for ease of installation and durability. Plus, new design innovations increase the availablity of these panelboards by offering complete ready to install products.
PAGE 14
NF Lighting Panelboards PANEL 4 The NF panelboard offers superior performance and application flexibility for commercial and industrial electrical systems up to 600Y/347Vac. This versatile lighting and power distribution panelboard features a wide selection of circuit breakers, accessories and ready-to-install kits, as well as 200% rated neutrals for non-linear loads.
PAGE 15
Features Panelboard Types Benefits NQ NF Column-Width I-Line QMB Complete ready-to-install product offering Yes Yes Yes Yes Yes Main circuit breaker ready-to-install kits Yes Yes – – – Creates flexible inventory Vertically mounted main breakers available Yes Yes Yes Yes – Allows quick main breaker identification as a result of vertical handle motion Field installable cULus listed 200% neutral for non-linear loads Yes Yes – Yes – Field installable 200% neutral now available
PAGE 16
NF/NFOM Panelboards Information Manual Class 1670 Instruction Bulletin 80043-741-02 Retain in the directory card pocket for future use.
PAGE 17
HAZARD CATEGORIES AND SPECIAL SYMBOLS Read these instructions carefully and look at the equipment to become familiar with the device before trying to install, operate, service, or maintain it. The following special messages may appear throughout this bulletin or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.
PAGE 18
80043-741-02 07/2010 NF/NFOM Panelboards Information Manual Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Interior Mounting for Square D Brand Enclosures . . . . . .
PAGE 19
NF/NFOM Panelboards Information Manual Table of Contents 80043-741-02 07/2010 ENGLISH 4 Jefferson Shop Building © 2008–2010 Schneider Electric All Rights Reserved Electrical Equipment O&M Manual Page 19 of 141
PAGE 20
80043-741-02 07/2010 NF/NFOM Panelboards Information Manual List of Figures and List of Tables Figure 1: Figure 2: Figure 3: Figure 4: Figure 5: Figure 6: Figure 7: Figure 8: Figure 9: Figure 10: Figure 11: Interior Mounting of Square D Brand Enclosures . . . . . . . . . . . . . . . . . Bonding Strap Installation — 125 A or 250 A Maximum NF Panelboards . . . . . . . . . . . . . . . . . . . . . Bonding Strap Installation — 400 A or 600 A Maximum NF Panelboards . . . . . . . . . . . . . . . . . . . . .
PAGE 21
NF/NFOM Panelboards Information Manual List of Figures and List of Tables 80043-741-02 07/2010 ENGLISH LIST OF TABLES Table 1: Table 2: Table 3: Table 4: Table 5: Table 6: Table 7: Table 8: Panelboard Typical Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Series Connected Breaker Ratings (RMS Symmetrical) . . . . . . . . . . . . 24 Equipment Ground Bar Kits Specifications . . . . . . . . . . . . . . . . . . . . . .
PAGE 22
80043-741-02 07/2010 NF/NFOM Panelboards Information Manual Introduction ENGLISH Introduction This bulletin contains instructions for installing Square D® brand NF and NFOM circuit breaker panelboards. These panelboards are Underwriters Laboratories (cULus) listed and accept ECB, EDB, EGB, and EJB branch circuit breakers. For technical support on the installation of this panelboard, contact the Square D/Schneider Electric Customer Information Center at 1-888-SquareD (1-888-778-2733).
PAGE 23
NF/NFOM Panelboards Information Manual Installation 80043-741-02 07/2010 Installation ENGLISH This section provides instructions for the following NF/NFOM panelboard procedures: • • • “Interior Mounting for Square D Brand Enclosures” on page 8 • • “Circuit Breaker Reset Instructions” on page 17 “Neutral Bonding Strap Installation” on page 11 “ECB, EDB, EGB, and EJB Circuit Breaker Installation and Removal” on page 15 “Interior Trim Preparation” on page 18 Interior Mounting for Square D Brand Enclos
PAGE 24
80043-741-02 07/2010 NF/NFOM Panelboards Information Manual Installation ENGLISH Surface Mounting (Enclosure Mounted on Wall) 1. Mount the enclosure as instructed in the NEMA PB 1.1 standards publication. 2. Remove the interior trim from the trim brackets. 3. Install the interior as described below: a. Thread the provided elevating nuts on the enclosure studs. b. Set the interior on the enclosure studs. (See Figure 1 on page 10). c.
PAGE 25
NF/NFOM Panelboards Information Manual Installation Figure 1: 80043-741-02 07/2010 Interior Mounting of Square D Brand Enclosures ENGLISH Interior Trim 0.25 in. (6.
PAGE 26
80043-741-02 07/2010 NF/NFOM Panelboards Information Manual Installation The neutral bonding strap should be used only when the panelboard is installed as service equipment. To properly bond the neutral to the panelboard, follow the instructions for either “125 A or 250 A Maximum NF Panelboards”, “400 A or 600 A Maximum NF Panelboards”, or “800 A Maximum NF Panelboards” below, and on pages 12–14.
PAGE 27
NF/NFOM Panelboards Information Manual Installation 80043-741-02 07/2010 125 A or 250 A Maximum NF Panelboards ENGLISH To install a neutral bonding strap on a 125 A or 250 A maximum NF panelboard, refer to Figure 2 and follow the instructions below. 1. Align the bonding strap on the side rail, as pictured. NOTE: For some applications, it may be necessary to remove the lug (not pictured) before installing the bonding strap. 2. Insert the two mounting screws, as pictured.
PAGE 28
80043-741-02 07/2010 NF/NFOM Panelboards Information Manual Installation ENGLISH 400 A or 600 A Maximum NF Panelboards To install a neutral bonding strap on a 400 A or 600 A maximum NF panelboard, refer to Figure 3 and follow the instructions below. 1. Align the two bonding straps on the side rail, as pictured. NOTE: For some applications, it may be necessary to remove the lug before installing the bonding strap. 2. Insert the three mounting screws, as pictured. Tighten the 10-32 screw to 10–12 lb-in (1.
PAGE 29
NF/NFOM Panelboards Information Manual Installation 80043-741-02 07/2010 800 A Maximum NF Panelboards ENGLISH To install a neutral bonding strap on an 800 A maximum NF panelboard, refer to Figure 4 and follow the instructions below. 1. Align the two bonding straps on the side rail, as pictured. 2. Insert the two mounting screws, as pictured. Tighten the 10-32 screw to 10–12 lb-in (1.1–1.4 N•m) and the 1/4-20 screw to 60–65 lb-in (6.8–7.3 N•m).
PAGE 30
80043-741-02 07/2010 NF/NFOM Panelboards Information Manual Installation ENGLISH ECB, EDB, EGB, and EJB Circuit Breaker Installation and Removal DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH • Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See NFPA 70E. • This equipment must only be installed and serviced by qualified electrical personnel. • Turn off all power supplying this equipment before working on or inside equipment.
PAGE 31
NF/NFOM Panelboards Information Manual Installation 80043-741-02 07/2010 ECB, EDB, EGB, and EJB Circuit Breaker Removal ENGLISH Refer to Figure 5 on page 16 for the following instructions: 1. Turn off all power to the panelboard. 2. Remove the interior trim. 3. Turn the breaker off. 4. Remove the load wire. 5. Loosen the screw(s) in the breaker connector and lift the breaker off of the panelboard. 6. Reinstall the interior trim.
PAGE 32
80043-741-02 07/2010 NF/NFOM Panelboards Information Manual Installation If the circuit breaker is tripped, the handle will be at the mid-position between ON and OFF. To reset the circuit breaker, push the handle to the OFF position, then to the ON position.
PAGE 33
NF/NFOM Panelboards Information Manual Installation 80043-741-02 07/2010 Interior Trim Preparation ENGLISH DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH • Before energizing the panelboard, all unused spaces must be filled with blank fillers. • Replace all devices, doors, and covers before energizing this equipment. Failure to follow this instruction will result in death or serious injury.
PAGE 34
80043-741-02 07/2010 NF/NFOM Panelboards Information Manual Appendix 1: Specifications Typical Wiring NOTE: Do not use on 600 V or 480 V, 3-phase 3-wire delta systems. Table 1: Panelboard Typical Wiring1 1-Phase Panelboards Voltage AC 3-Phase Panelboards Phase Wires Phase Wires 600Y/347 1 3 3 4 480Y/277 1 3 3 4 208Y/120 1 3 3 4 120/240 1 3 — — 2402 1 2 3 3 240 3 3 — — 240/1203 — — 3 4 Delta 1 Additional information is provided on the panelboard.
PAGE 35
NF/NFOM Panelboards Information Manual Appendix 1: Specifications Figure 8: 80043-741-02 07/2010 NF/NFOM 125–250 A Main Lugs or Main Breaker Diagram ENGLISH Isolated Ground (when installed) Backfed Main Circuit Breaker Ground (when required) Enclosure Bonding Neutral (when required) Integral Main Circuit Breaker (when installed) 20 Jefferson Shop Building © 2008–2010 Schneider Electric All Rights Reserved Electrical Equipment O&M Manual Page 35 of 141
PAGE 36
80043-741-02 07/2010 NF 400–800 A Main Lugs or Main Circuit Breaker with or without Feed-Through Lugs Diagram ENGLISH Figure 9: NF/NFOM Panelboards Information Manual Appendix 1: Specifications Load Feed-Through Lugs (when installed) Isolated Ground (when installed) Ground (when required) Enclosure Bonding Neutral (when required) Integral Main Circuit Breaker (when installed) © 2008–2010 Schneider Electric All Rights Reserved Jefferson Shop Building Electrical Equipment O&M Manual 21 Page
PAGE 37
NF/NFOM Panelboards Information Manual Appendix 1: Specifications Figure 10: 80043-741-02 07/2010 ENGLISH NF 400–800 A Main Circuit Breaker with Feed-Through Lugs or Sub-Feed Circuit Breakers Diagram Sub-Feed Circuit Breaker(s) (when installed) Load Isolated Ground (when installed) Ground (when required) Enclosure Bonding Neutral (when required) Line Integral Main Circuit Breaker (when installed) 22 Jefferson Shop Building © 2008–2010 Schneider Electric All Rights Reserved Electrical Equip
PAGE 38
80043-741-02 07/2010 Typical NF Panelboard with Split Bus Diagram ENGLISH Figure 11: NF/NFOM Panelboards Information Manual Appendix 1: Specifications Isolated Ground (when installed) Ground (when required) Enclosure Bonding Neutral (when required) Integral Main Circuit Breaker (when installed) © 2008–2010 Schneider Electric All Rights Reserved Jefferson Shop Building Electrical Equipment O&M Manual 23 Page 38 of 141
PAGE 39
NF/NFOM Panelboards Information Manual Appendix 1: Specifications 80043-741-02 07/2010 Panelboard Ratings ENGLISH Refer to NEC section 110-22 and CEC rule 14-014 for more information. The series rated system label is located in the bag assembly. NOTE: 125 A ED/EG/EJ breakers are 480Y/277 Vac maximum only. Table 2: Max. System Voltage AC1 Series Connected Breaker Ratings (RMS Symmetrical) Max.
PAGE 40
NF/NFOM Panelboards Information Manual Appendix 1: Specifications Short Circuit Current Rating for Main Lug Interiors with Sub-Feed or Feed-Through Lugs Main lug interiors equipped with sub-feed or feed-through lugs, where the device feeding the interior is unknown or not a Square D device, are rated to 25,000 RMS symmetrical amperes at 600Y/347 Vac maximum for three cycles.
PAGE 41
NF/NFOM Panelboards Information Manual Appendix 2: Accessory Kits 80043-741-02 07/2010 Appendix 2: Accessory Kits ENGLISH An assortment of field-installable accessory kits are available for NF panelboards: • • • Equipment Ground Bar Kits, on page 27 Sub-Feed Lug Kits 125–400 A Panelboards, on page 27 Main Lug Kits — Mechanical Lug Kits — Aluminum, on page 28 — Mechanical Lug Kits — Copper, on page 28 — Versa-Crimp® Compression Lug Kits — Aluminum, on page 29 — Versa-Crimp® Compression Lug Kits — Copper
PAGE 42
80043-741-02 07/2010 NF/NFOM Panelboards Information Manual Appendix 2: Accessory Kits ENGLISH Equipment Ground Bar Kits Equipment ground bar kits, suitable for copper or aluminum wire, meet the grounding needs of NF panelboards.
PAGE 43
NF/NFOM Panelboards Information Manual Appendix 2: Accessory Kits 80043-741-02 07/2010 Main Lug Kits ENGLISH Table 5: Mechanical Lug Kits — Aluminum Panelboard Amps Kit Catalog Number Wire Range 125 Standard 250 Standard #6–350 kcmil 13.3–177.3 mm2 400 Standard 600 Standard (2) 1/0–750 kcmil (2) 53.48–380 mm2 800 Standard (3) 1/0–750 kcmil (3) 53.48–380 mm2 Table 6: (1) 1/0–750 kcmil (2) 1/0–350 kcmil (1) 53.48–380 mm2 (2) 53.48–177.
PAGE 44
80043-741-02 07/2010 Versa-Crimp® Compression Lug Kits — Aluminum Panelboard Amps Kit Catalog Number Wire Range 125 NFALV1 #4–300 kcmil 21.15–152 mm2 250 NFALV2 250–350 kcmil 126.7–177.3 mm2 400 NFALV4 600 NFALV6 Table 8: ENGLISH Table 7: NF/NFOM Panelboards Information Manual Appendix 2: Accessory Kits Crimp Tool VC6 (2) 2/0–500 kcmil (2) 67.43–253.
PAGE 45
NF/NFOM Panelboards Information Manual Instruction Bulletin Schneider Electric USA 252 North Tippecanoe Peru, IN 46970 USA 1-888-SquareD (1-888-778-2733) www.us.SquareD.com Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material.
PAGE 46
NQ/NQM Panelboards and QONQ Load Centers Information Manual Class 1640 Instruction Bulletin 80043-712-05 Retain in the directory card pocket for future use.
PAGE 47
HAZARD CATEGORIES AND SPECIAL SYMBOLS Read these instructions carefully and look at the equipment to become familiar with the device before trying to install, operate, service, or maintain it. The following special messages may appear throughout this bulletin or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.
PAGE 48
80043-712-05 07/2010 NQ/NQM Panelboards and QONQ Load Centers Information Manual Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 49
NQ/NQM Panelboards and QONQ Load Centers Information Manual Table of Contents 80043-712-05 07/2010 LIST OF FIGURES ENGLISH Figure 1: Interior Mounting of Square D Brand Enclosures . . . . . . . . . . . . . . . . . . . . . . 8 Figure 2: Bonding Strap Installation — 100 or 250 A Maximum NQ Panelboards . . . 10 Figure 3: Bonding Cable Installation — 400 or 600 A Maximum NQ Panelboards and QONQ Load Centers . . . 11 Figure 4: QO and QOB Circuit Breaker Installation and Removal . . . . . . . . . . . . . . . .
PAGE 50
80043-712-05 07/2010 NQ/NQM Panelboards and QONQ Load Centers Information Manual Introduction This bulletin contains instructions for installing Square D® brand NQ circuit breaker panelboards and QONQ load centers. These panelboards and load centers are Underwriters Laboratories (cULus) listed and accept QO® and QOB branch circuit breakers. For technical support on the installation of this panelboard, contact the Square D/Schneider Electric Customer Information Center at 1-888-SquareD (1-888-778-2733).
PAGE 51
NQ/NQM Panelboards and QONQ Load Centers Information Manual Installation 80043-712-05 07/2010 Installation ENGLISH This section provides instructions for the following NQ panelboard and QONQ load center procedures: • • • “Interior Mounting for Square D Brand Enclosures” on page 6 • • “Circuit Breaker Reset Instructions” on page 15 “Neutral Bonding Strap/Cable Installation” on page 9 “QO and QOB Circuit Breaker Installation and Removal” on page 12 “Interior Trim Preparation” on page 16 Interior Moun
PAGE 52
80043-712-05 07/2010 NQ/NQM Panelboards and QONQ Load Centers Information Manual Installation ENGLISH Surface Mounting (Enclosure Mounted on Wall) 1. Mount the enclosure as instructed in the NEMA PB 1.1 standards publication. 2. Remove the interior trim from the trim brackets. 3. Install the interior as described below: a. Set the interior on the enclosure studs. An elevating screw is not required (See Figure 1 on page 8). b.
PAGE 53
NQ/NQM Panelboards and QONQ Load Centers Information Manual Installation Figure 1: 80043-712-05 07/2010 Interior Mounting of Square D Brand Enclosures ENGLISH Interior Trim 0.25 in. (6.
PAGE 54
80043-712-05 07/2010 NQ/NQM Panelboards and QONQ Load Centers Information Manual Installation The neutral bonding strap/cable should be used only when the panelboard is installed as service equipment. To properly bond the neutral to the panelboard, follow the instructions for either “100 or 250 A Maximum NQ Panelboards” or “400 or 600 A Maximum NQ Panelboards and QONQ Load Centers” below and on page 11, respectively.
PAGE 55
NQ/NQM Panelboards and QONQ Load Centers Information Manual Installation 80043-712-05 07/2010 ENGLISH 2. Insert the two mounting screws, as pictured. Tighten the 10-32 screw to 10–12 lb-in (1.1–1.4 N•m) and the 1/4-20 to 25–30 lb-in (2.8–3.4 N•m). NOTE: If the lug was removed in Step 1 above, reinstall it on top of the bonding strap. Use the 1/4-20 x 11/16 in. mounting screw with feed-through lug, sub-feed lug, sub-feed breaker, or 200% neutral applications. Use the 1/4-20 x 7/8 in.
PAGE 56
80043-712-05 07/2010 NQ/NQM Panelboards and QONQ Load Centers Information Manual Installation ENGLISH 400 or 600 A Maximum NQ Panelboards and QONQ Load Centers To install a neutral bonding cable on a 400 or 600 A maximum NQ panelboard and QONQ load center, refer to Figure 3 and follow the instructions below. 1. Align the lug on the side rail mounting hole, as pictured. 2. Tighten the lug mounting screw against the side rail to 10–12 lb-in (1.1–1.4 N•m). 3.
PAGE 57
NQ/NQM Panelboards and QONQ Load Centers Information Manual Installation 80043-712-05 07/2010 QO and QOB Circuit Breaker Installation and Removal ENGLISH DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH • Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See NFPA 70E. • This equipment must only be installed and serviced by qualified electrical personnel. • Turn OFF all power supplying this equipment before working on or inside equipment.
PAGE 58
80043-712-05 07/2010 NQ/NQM Panelboards and QONQ Load Centers Information Manual Installation ENGLISH QO and QOB Breaker Installation Refer to Figure 4 on page 14 for the following instructions: 1. Turn OFF all power to the panelboard. 2. Turn the breaker OFF. 3. Remove the interior trim. 4. Snap the wire terminal end of the circuit breaker onto the mounting rail. 5. Engage the branch connector. For QO Circuit Breakers: a. Push inward until the plug-on jaws fully engage the branch connector.
PAGE 59
NQ/NQM Panelboards and QONQ Load Centers Information Manual Installation Figure 4: 80043-712-05 07/2010 QO and QOB Circuit Breaker Installation and Removal ENGLISH Wire Terminal QO Plug-On Jaw Rail Branch Connector Wire Terminal QOB CL Bolt-On Connector Screw Rail Branch Connector 14 © 2007–2010 Schneider Electric All Rights Reserved Jefferson Shop Building Electrical Equipment O&M Manual Page 59 of 141
PAGE 60
80043-712-05 07/2010 NQ/NQM Panelboards and QONQ Load Centers Information Manual Installation If the circuit breaker is tripped, the handle will be at the mid-position between ON and OFF. To reset the circuit breaker, push the handle to the OFF position, then to the ON position.
PAGE 61
NQ/NQM Panelboards and QONQ Load Centers Information Manual Installation 80043-712-05 07/2010 Interior Trim Preparation ENGLISH DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH • Before energizing the panelboard, all unused spaces must be filled with blank fillers. • Replace all devices, doors, and covers before energizing this equipment. Failure to follow this instruction will result in death or serious injury.
PAGE 62
80043-712-05 07/2010 NQ/NQM Panelboards and QONQ Load Centers Information Manual Appendix 1: Specifications ENGLISH Appendix 1: Specifications Typical Wiring Table 1: Panelboard Typical Wiring1 1-Phase Panelboards Voltage AC 3-Phase Panelboards Phase Wires Phase 208Y/120 — — 3 Wires 4 120/240 1 3 — — 2402 1 2 3 3 2403 3 3 — — 240/1204 — — 3 4 Delta 1 Additional information is provided on the panelboard. See the main circuit breaker rating, if used.
PAGE 63
NQ/NQM Panelboards and QONQ Load Centers Information Manual Appendix 1: Specifications 80043-712-05 07/2010 ENGLISH Integral Main or Sub-Feed: DJ, FI, KI, H, J, LA, LC, LH, QB, QD, QG, QJ, QO(B)VH Figure 7: NQ/NQM 100–225 A Main Lugs or 100–250 A Main Breaker Diagram Isolated Ground Backfed Main Circuit Breaker (when installed) (must be bolt-on, if used) Ground (when required) Enclosure Bonding (when required) Neutral Integral Main Circuit Breaker (when installed) 18 © 2007–2010 Schneider E
PAGE 64
Figure 8: NQ/NQM Panelboards and QONQ Load Centers Information Manual Appendix 1: Specifications NQ Panelboard or QONQ Load Center 400–600 A Main Lugs or Main Circuit Breaker with or without Feed-Through Lugs Diagram Load Feed-Through Lugs (when installed) Ground (when required) Enclosure Bonding (when required) Neutral Integral Main Circuit Breaker (when installed) 19 © 2007–2010 Schneider Electric All Rights Reserved Jefferson Shop Building Electrical Equipment O&M Manual Page 64 of 141 ENG
PAGE 65
NQ/NQM Panelboards and QONQ Load Centers Information Manual Appendix 1: Specifications Figure 9: 80043-712-05 07/2010 ENGLISH NQ Panelboard or QONQ Load Center 400–600 A Main Circuit Breaker with Feed-Through Lugs or Sub-Feed Circuit Breakers Diagram Subfeed Circuit Breaker(s) (when installed) Load Ground (when required) Enclosure Bonding Neutral (when required) Line Integral Main Circuit Breaker (when installed) 20 © 2007–2010 Schneider Electric All Rights Reserved Jefferson Shop Building
PAGE 66
80043-712-05 07/2010 Typical NQ Panelboard with Split Bus Diagram ENGLISH Figure 10: NQ/NQM Panelboards and QONQ Load Centers Information Manual Appendix 1: Specifications Ground (when required) Enclosure Bonding (when required) Neutral Integral Main Circuit Breaker (when installed) 21 © 2007–2010 Schneider Electric All Rights Reserved Jefferson Shop Building Electrical Equipment O&M Manual Page 66 of 141
PAGE 67
NQ/NQM Panelboards and QONQ Load Centers Information Manual Appendix 1: Specifications 80043-712-05 07/2010 Panelboard Ratings ENGLISH Refer to NEC section 110-22 and CEC rule 14-014 for more information. The series rated system label is located in the bag assembly. Table 2: Series Connected Breaker Ratings (RMS Symmetrical) Max. Short Max.
PAGE 68
80043-712-05 07/2010 Series Connected Breaker Ratings (RMS Symmetrical) (continued) Max. Short Max.
PAGE 69
NQ/NQM Panelboards and QONQ Load Centers Information Manual Appendix 1: Specifications Table 2: 80043-712-05 07/2010 Series Connected Breaker Ratings (RMS Symmetrical) (continued) ENGLISH Max. Short Max.
PAGE 70
80043-712-05 07/2010 Series Connected Breaker Ratings (RMS Symmetrical) (continued) Max. Short Max.
PAGE 71
NQ/NQM Panelboards and QONQ Load Centers Information Manual Appendix 1: Specifications Table 2: 80043-712-05 07/2010 Series Connected Breaker Ratings (RMS Symmetrical) (continued) ENGLISH Max. Short Max. System Circuit 12 Current Voltage AC Rating 65,000 100,000 240 200,000 Square D Brand Branch Circuit Breaker Catalog Square D Designation and Allowable Ampere Ranges3 4 5 6 Brand Integral or Remote Main Circuit Type 1 Pole 2 Pole 3 Pole Breakers and Remote Main Fuses 400 A Max.
PAGE 72
Table 3: Maximum System Voltage AC NQ/NQM Panelboards and QONQ Load Centers Information Manual Appendix 1: Specifications Short Circuit Current Rating1 for Main Lug Interiors with Sub-Feed or Feed-Through Lugs Maximum Current Rating Branch Circuits 100 18, 30 SFL and FTL — 30, 42, 54, 72, 84 SFL 6 inches (152.
PAGE 73
NQ/NQM Panelboards and QONQ Load Centers Information Manual Appendix 2: Accessory Kits 80043-712-05 07/2010 Appendix 2: Accessory Kits ENGLISH An assortment of field-installable accessory kits are available for NQ panelboards: • • • • Equipment Ground Bar Kits Oversized Lug Kits for 100–250 A Panelboards Sub-Feed Lug Kits for 100–400 A Panelboards Main Lug Kits — Mechanical Lug Kits — Aluminum — Mechanical Lug Kits — Copper — Versa-Crimp® Compression Lug Kits — Aluminum — Versa-Crimp Compression Lug Ki
PAGE 74
80043-712-05 07/2010 NQ/NQM Panelboards and QONQ Load Centers Information Manual Appendix 2: Accessory Kits ENGLISH Oversized Lug Kits for 100–250 A Panelboards Oversized lug kits are available for applications where termination conductors of 3 AWG or larger are required for the neutral. Table 5: Oversized Lug Kits for 100–250 A Panelboards Specifications Circuit Breaker Rating Kit Catalog Number Wire Range (1) 10–2 Al (1) 5.76–33.6 mm2 70 A QO70AN 80–125 A Q1100AN (1) 4–1/0 Al/Cu (1) 42.4–53.
PAGE 75
NQ/NQM Panelboards and QONQ Load Centers Information Manual Appendix 2: Accessory Kits 80043-712-05 07/2010 Main Lug Kits ENGLISH Table 7: Mechanical Lug Kits — Aluminum Panelboard Amps Kit Catalog Number 100 Standard 225 Standard 400 Standard #6–2/0 AWG 13.3–67.43 mm2 #6–350 kcmil 13.3–177.3 mm2 (1) 1/0–750 kcmil (2) 1/0–350 kcmil (1) 53.48–380 mm2 (2) 53.48–177.3 mm2 (2) 1/0–750 kcmil (2) 53.48–380 mm2 (3) #6–250 kcmil (3) 13.
PAGE 76
NQ/NQM Panelboards and QONQ Load Centers Information Manual Instruction Bulletin Schneider Electric USA 252 North Tippecanoe Peru, IN 46970 USA 1-888-SquareD (1-888-778-2733) www.us.SquareD.com Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material.
PAGE 77
BENTON ELECTRIC, INC. GET CONNECTED V.541.967.1244 F.541.967.8257 email@bentonelectric.
PAGE 78
TRANSFORMER Jefferson Shop Building Electrical Equipment O&M Manual Page 78 of 141
PAGE 79
Jefferson Shop Building Electrical Equipment O&M Manual Page 79 of 141
PAGE 80
43006-850-01R1 11/2004 Huntington, IN USA Instruction Bulletin ENGLISH Replaces 43006-850-01, 12/1992 Dry-Type Transformers 600 Volts and Below General Installation, Operation, and Maintenance Class 7410 Retain for future use. SAFETY PRECAUTIONS DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH • Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See NFPA 70E. • This equipment must only be installed and serviced by qualified electrical personnel.
PAGE 81
Dry-Type Transformers 600 Volts and Below Installation HANDLING 43006-850-01R1 11/2004 ENGLISH Keep all transformers in the upright position in which they were shipped. Use lifting cables or chains with spreader bars to avoid damage to the finish or parts. Whenever there are no external lifting provisions, remove the top cover. Secure cables or chains to the top core-clamping channels or angles where holes are provided for this purpose.
PAGE 82
LOCATION/PLACEMENT OF VENTILATED AND NON-VENTILATED TRANSFORMERS Dry-Type Transformers 600 Volts and Below Installation Ventilated dry-type transformers normally are designed for installation in dry locations. They will, however, operate successfully while energized where the humidity is high. Under this condition, though, it may be necessary to take precautions to keep them dry if they are shut down for prolonged periods. Refer to “Operation” on page 5 for more detailed information.
PAGE 83
Dry-Type Transformers 600 Volts and Below Installation 43006-850-01R1 11/2004 herein, the complete equipment installation might become too flexible and may overturn or shear the attachment devices and slide off its foundation. ENGLISH The structural civil engineer or design engineer of record is responsible for detailing the equipment connection and anchorage requirements (including the lateral restraint system if appropriate) for the given installation.
PAGE 84
43006-850-01R1 11/2004 Dry-Type Transformers 600 Volts and Below Operation Table 1: ENGLISH Once installed, the sound level may exceed the NEMA tested level due to some of the points previously illustrated.
PAGE 85
Dry-Type Transformers 600 Volts and Below Maintenance 43006-850-01R1 11/2004 ENGLISH DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH • Turn off power supplying this equipment before working on it. • Discharge all static charges held by coils. Failure to follow these instructions will result in death or serious injury. 1. De-energize the transformer, and remove the access covers. Inspect for: — dirt on insulating surfaces and at areas which tend to restrict air flow. — loose connections.
PAGE 86
43006-850-01R1 11/2004 Dry-Type Transformers 600 Volts and Below Replacement Parts and Accessories REPLACEMENT PARTS AND ACCESSORIES ENGLISH Table 2: Table 2 lists available transformer lug kits. For additional information regarding terminal connectors, refer to the label on the transformer, on the reverse side of the front panel. VERSAtile™ Compression Lugs and Mechanical Set-Screw Types—UL Listed Lugs AL9CU (90° C Rated) Terminal Lugs Transformer kVA Sizes Kit Catalog Number Catalog Number Qty.
PAGE 87
Dry-Type Transformers 600 Volts and Below Instruction Bulletin 43006-850-01R11R1 11/2004 ENGLISH Schneider Electric USA 6 Commercial Road Huntington, IN 46750 USA 1-888-SquareD (1-888-778-2733) www.us.SquareD.com Jefferson Shop Building Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material.
PAGE 88
BENTON ELECTRIC, INC. GET CONNECTED V.541.967.1244 F.541.967.8257 email@bentonelectric.
PAGE 89
IMX LINEAR FLUORESCENT HIGH BAY PRODUCT HIGHLIGHTS LSI INDOOR LIGHTING FINISH - !LL METAL PARTS AND HOUSING ARE FINISHED WITH HIGH REFLECTANCE LIGHTING FIXTURE WHITE POLYESTER POWDER AFTER FABRICATION s (IGH EFFICIENCY 4 4 LAMPS FOR SIGNIFICANT ENERGY SAVINGS OVER ()$ HIGH BAYS PHOTOMETRICS - 0LEASE VISIT OUR WEB SITE AT WWW LSI INDUSTRIES COM FOR DETAILED PHOTOMETRIC DATA s 5NIT MAY BE PENDANT CHAIN OR SURFACE MOUNTED s (UB MOUNTING OPTION ALLOWS SINGLE POINT MOUNT FOR DIRECT REPLACEMENT OF (
PAGE 90
IMX (3,4 & 6 LAMP) DIMENSIONS 3 7/32" 3 1/4" [81.7mm] 3 7/32" 14 1/4" 3 LAMP 14 1/4" [362.0mm] 6 LAMP 14 1/4" 4 LAMP MOUNTING (8) CHAIN HANGING SLOT SETS 2 1/4" [58.0mm] [76.2mm] 2 5/8" [66.0mm] 1 1/2" [38.1mm] (3) 7/8" [ 22.2mm] 1 3/8" [35.4mm] 10 3/4" [272.0mm] 24" [610.5mm] 4' FIXTURE 48 1/8" [1221.0mm] COMBINATION HEAT REMOVAL AND OPTIONAL UP-LIGHT SLOTS (8) CHAIN HANGING SLOT SETS 1 1/4" [31.8mm] 1" [24.6mm] ACCESS PLATE W/ (2) 7/8" K.O.'S 1 1/4" [31.
PAGE 91
PRX - THERMOPLASTIC COMBO EXIT / EMERGENCY LSI INDOOR LIGHTING LIFE SAFETY HOUSING • Contractor Oriented Snap Together Design • Universal Chevron and Face Selection • Unique “Swing-to-Position” Head Design • High Impact Thermoplastic ILLUMINATION • L.E.D. source - available in long life, high output red or green • Low Energy consumption • Fully Illuminated 6 Inch Letter with ¾” Stroke • Fully Adjustable 6 volt 5.
PAGE 92
Catalog Number LIF6 2/13DTT MVOLT BDP F6LD3 Notes JEFFERSON SANDING SHED FEATURES & SPECIFICATIONS Type F INTENDED USE 6" Housing Recessed frame-in rated IC for new construction only. Approved for all ceiling and wiring types. LIF6 CONSTRUCTION Steel housing. Galvanized bar hangers span up to 24” o.c. and feature built-in nailer and T-bar clips. Galvanized steel junction box with four built-in romex clamps; two 1/2" and four 3/4" knockouts with slots for pryout.
PAGE 93
F Series 6" Fluorescent LIF6 Full Reflector Trims Description Catalog number Maximum wattage Description Sheet number Catalog number General/Task Open Narrow Flange F6O2 White F6O2A Clear Diffuse F6O2G Gold Diffuse F6O2AZ Clear Specular3 F6O2GZ Gold Specular 3 Maximum wattage Sheet number Lens/Wet Location Glass Lens F6LD3 F6LDB3 F6LF3 F6LFB3 F6L4 F6LB4 Narrow Flange Drop Opal White Splay Drop Opal Black Baffle Flat White White Splay Flat White Black Baffle Fresnel White Splay Fresnel Black Baffle 13
PAGE 94
Catalog Number LB 3 32 MVOLT 1/3 Notes FEATURES & SPECIFICATIONS INTENDED USE For applications that require the clean appearance of a low-profile, brightness-controlled wraparound. Provides broad distribution of light for offices, schools and corridors. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.
PAGE 95
LB 3 Low-Profile Wraparound, Wide Body MOUNTING DATA DIMENSIONS For unit or row installation, surface or stem mounting. Stem mounting not available on TLB units. Inches (centimeters). Subject to change without notice. Individual installation — Four single-stem hangers required. Row installation — Two hangers per fixture plus two per row required. A C D E See ACCESSORIES below for hanging devices. = = = = 1/4 x 1/2 (.635 x 1.27) hole 7/8 (2.22) Dia.K.O. 11/16 (1.74) Dia. K.O. 2 (5.08) Dia. K.O.
PAGE 96
BENTON ELECTRIC, INC. GET CONNECTED V.541.967.1244 F.541.967.8257 email@bentonelectric.
PAGE 97
® LSI OUTDOOR LIGHTING BUILDING & WALL MOUNT CHALLENGER WALL SCONCE (Various reflectors are protected by U.S. Patent No. 6,464,378.) HOUSING - The aerodynamic aluminum housing is a rectangular shape. All mounting hardware is stainless steel or electro-zinc plated steel. COMMUNITY FRIENDLY WALL MOUNT - A galvanized-steel universal wall mounting plate easily mounts directly to a 4” octagonal or square junction box.
PAGE 98
® CHALLENGER WALL SCONCE LUMINAIRE ORDERING INFORMATION Luminaire Prefix CHWS (Small) CHWM FT 400 PSMHR F 120 Distribution Lamp Wattage 50 70 100 150 FTM - Forward Throw Medium 26 32 42 3 - Type III FT - Forward Throw Line Voltage F- Flat Clear Tempered Glass 120 208 240 277 347 F- Flat Clear Tempered Glass FPC - Flat Clear Polycarbonate 4 UE - Universal Electronic (120-277V 50/60Hz) Luminaire Finish BRZ – Bronze BLK – Black PLP – Platinum Plus BUF – Buff WHT – White SVG - Satin Verde Green GP
PAGE 99
® LSI OUTDOOR LIGHTING BUILDING & WALL MOUNT CHALLENGER WALL SCONCE (Various reflectors are protected by U.S. Patent No. 6,464,378.) HOUSING - The aerodynamic aluminum housing is a rectangular shape. All mounting hardware is stainless steel or electro-zinc plated steel. COMMUNITY FRIENDLY WALL MOUNT - A galvanized-steel universal wall mounting plate easily mounts directly to a 4” octagonal or square junction box.
PAGE 100
® CHALLENGER WALL SCONCE LUMINAIRE ORDERING INFORMATION Luminaire Prefix CHWS (Small) CHWM FT 400 PSMHR F 120 Distribution 3 - Type III FT - Forward Throw WW - Wall Wash Lamp Wattage 50 70 100 150 FTM - Forward Throw Medium 26 32 42 3 - Type III FT - Forward Throw Line Voltage F- Flat Clear Tempered Glass 120 208 240 277 347 F- Flat Clear Tempered Glass FPC - Flat Clear Polycarbonate 4 UE - Universal Electronic (120-277V 50/60Hz) Luminaire Finish BRZ – Bronze BLK – Black PLP – Platinum Plus BU
PAGE 101
BENTON ELECTRIC, INC. GET CONNECTED V.541.967.1244 F.541.967.8257 email@bentonelectric.
PAGE 102
Sidewall - Direct Drive CW-098 and CW-101 Model: CW-098-A Designation: EF-801 *281⁄4 1.4 RPM Density 0.075 lb/ft3 247⁄8 167⁄8 (632) (429) 1.2 250 1.0 200 150 Static Pressure in. wg (502) 300 098 -A 0.8 0.6 0.4 098-B 50 0.2 101-C 098-C 0 0.
PAGE 103
Sidewall - Direct Drive CW-141, CW-141HP, CW-161 and CW-161HP *293⁄4 Model: CW-161-A Designation: EF-802 2.8 (756) Static Pressure in. wg A 116 200 1.2 0.8 141-B B 116 (492) 1.6 B P1H 16 (733) 2.0 A 114 287⁄8 193⁄8 -A HP 161 (562) 400 RPM Density 0.075 lb/ft3 2.4 A P1H 14 221⁄8 Static Pressure Pa 600 141-C 0.4 C 116 0 0.
PAGE 104
PN 457691 Models CW/CWB Centrifugal Sidewall Exhaust Fans ® Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information.
PAGE 105
CW - Direct Drive Dimensions CW-098, 101, 121, 131 CW-141, 161 CW-180, 200 183⁄8 131⁄2 143⁄4 (467) (343) (375) 21 13 ⁄8 17 ⁄8 10 ⁄2 10 12 15 (533) (340) (454) (267) (254) (305) (381) 3 7 B** Damper Mounting Wall Damper Frame Bolt Opening Size Size Circle 81⁄2 8 113⁄4 10 (254) (216) 1 (203) (298) 21 151⁄4 177⁄8 101⁄2 10 12 15 (533) (387) (454) (267) (254) (305) (381) C 247⁄8 281⁄4 193⁄4 121⁄2 12 14 16 7⁄8 (632) (718) (502) (318) (305) (356) (429) 287⁄8
PAGE 106
(wide temperature swings may cause condensation and “sweating” of metal parts). All accessories must be stored indoors in a clean, dry atmosphere. Remove any accumulations of dirt, water, ice, or snow and wipe dry before moving to indoor storage. To avoid “sweating” of metal parts, allow cold parts to reach room temperature. To dry parts and packages use a portable electric heater to get rid of any moisture buildup. Leave coverings loose to permit air circulation and to allow for periodic inspection.
PAGE 107
Pre-Starting Checks 6 DECAL Caulking TOP DETAIL 3 5 Wheel Overlap and Gap Dimensions DETAIL 4 6 3. Once the mounting plate has been attached to the wall, the unit can be installed. The unit should be aligned with the breather tube (7) pointing down. The electrical chase should be guided through the hole in the motor compartment. The horizontal support channels (8) should slide over the mounting angle clips (10) on the mounting plate until the holes in the windband and clips are aligned.
PAGE 108
WARNING Correct direction of wheel rotation is critical. Reversed rotation will result in poor air performance, motor overloading and possible burnout. Model CWB Pre-Starting Belt Tension Checks 8. Always loosen tension enough to install belts without stretching, see figure 9. Belts WARNING The fan has been checked for mechanical noises at the factory prior to shipment. If mechanical noise should develop, suggested corrective actions are offered in the Troubleshooting section.
PAGE 109
Inspection: CW/CWB Inspection of the fan should be conducted at the first 30 minute and 24 hour intervals of satisfactory operation. 30 Minute Interval Inspect bolts, setscrews and motor mounting bolts. Adjust and tighten as necessary. 24 Hour Interval Check all internal components. On CWB unit only, inspect belt alignment and tension. Adjust and tighten as necessary. IMPORTANT Adjust (tighten) belt tension after the first 24-48 hours of operation.
PAGE 110
Recommended Relubrication Frequency in Months Table 3: Grease Manufacturers NOTE: If unusual environment conditions exist (extreme temperature, moisture or contaminants) more frequent lubrication is required. A good quality lithium base grease, conforming to NLGI Grade 2 consistency, such as those listed here may be used.
PAGE 111
CWB Belt Drive Centrifugal Sidewall Exhaust Fan Windband Birdscreen Mounting Plate Motor Compartment Wheel Breather Tube Cover Troubleshooting WARNING: Before taking any corrective action, make certain unit is not capable of operation during repairs. PROBLEM Excessive Noise or Vibration Reduced airflow CAUSE CORRECTIVE ACTION Bad Bearings Replace. Wheel unbalance Clean and remove all dirt buildup off wheel. Check wheel balance, rebalance in place if necessary.
PAGE 112
Louvers L-801 (24"x24") and L-802 (30"x60"). ESD-403 Stationary Louver Drainable Blade Application and Design ESD-403 is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates a drainable head member and stationary horizontal blades to channel water to the jambs which guides the water through vertical downspouts for escape at the sill.
PAGE 113
PERFORMANCE DATA ESD-403 Stationary Louver Drainable Blade Extruded Aluminum Free Area Chart (Sq. ft.) Width in Inches Height in Inches 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 16 0.46 0.76 1.06 1.35 1.65 1.95 2.25 2.47 2.77 3.07 3.37 3.67 3.97 4.26 4.56 4.79 5.08 5.38 5.68 18 0.50 0.83 1.15 1.48 1.81 2.13 2.46 2.70 3.03 3.35 3.68 4.01 4.33 4.66 4.98 5.22 5.54 5.87 6.19 24 0.77 1.28 1.78 2.28 2.78 3.28 3.78 4.16 4.
PAGE 114
INSTALLATION DETAILS ESD-403 Stationary Louver Drainable Blade Extruded Aluminum Maximum Size and Installation Information Maximum single section size for model ESD-403 is 120 in. W x 84 in. H or 84 in. W x 120 in. H (70 sq. ft). Larger openings require field assembly of multiple louver panels to make up the overall opening size. Individual louver panels are designed to withstand a 25 PSF wind-load (please consult Greenheck if the louvers must withstand higher wind-loads).
PAGE 115
PRODUCT DETAILS ESD-403 Stationary Louver Drainable Blade Extruded Aluminum Jefferson Shop Building Electrical Equipment O&M Manual Page 115 of 141
PAGE 116
OPTION DRAWINGS ESD-403 Stationary Louver Drainable Blade Extruded Aluminum FINISHES Finish Type Description/Application Color Selection Standard Colors: Any of the 24 standard colors shown can be furnished in 70% or 50% KYNAR 500®/HYLAR 5000® or Baked Enamel. Standard Warranty (Aluminum) 10 Years (Consult Greenheck for availability of extended warranty) 2-coat 70% KYNAR 500®/HYLAR 5000® AAMA 2605 – Dry ﬁlm thickness 1.2 mil.
PAGE 117
Dampers for Louvers L-801 and L-802. Sized to match Louvers. WD-400 SERIES Non-Motorized Backdraft Damper Horizontal or Vertical Mount (Intake) Application and Design The WD-400 series are non-motorized backdraft dampers which may be mounted either vertically for intake air or mounted horizontally to allow vertical airflow down and prevent reverse airflow. The dampers are opened by air pressure differential and closed by springs. Optional motor packs are not available.
PAGE 118
PERFORMANCE DATA WD-400 SERIES Pressure Drop Performance data results from testing a 36 in. x 36 in. (914mm x 914mm) damper in accordance with AMCA Standard 500-D using Figure 5.3 for the WD-400 and Figure 5.7A for the WD-410. All data has been corrected to represent standard air at 0.075 lb/ft3 (1.201 kg/m3). WD-400 ∆P in. wg (Pa) Operational Data Blades Start to Open 0.026 (6.5) 0.04 (10) Blades Fully Open WD-410 Velocity fpm (m/s) 250 (1.3) 1200 (6.
PAGE 119
WD-400/410 SELECTION • Multiple section dampers shown below are supplied as equal size sections. Any damper that has multiple sections, both vertically and horizontally, will require field assembly and will require additional reinforcement (not supplied by Greenheck) to support the assembly. These larger dampers must have the additional reinforcement to give them structural stability. • Please note that the width dimension is always taken as being parallel to the length of the blades.
PAGE 120
WD-420/430 SELECTION SPECIFICATIONS • Multiple section dampers shown below are supplied as equal size sections. Any damper that has multiple sections, both vertically and horizontally, will require field assembly and will require additional reinforcement (not supplied by Greenheck) to support the assembly. These larger dampers must have the additional reinforcement to give them structural stability. • Please note that the width dimension is always taken as being parallel to the length of the blades.
PAGE 121
® DAMPER MAINTENANCE DAMPERS AND LOUVERS Application and Design Greenheck's dampers are designed to be trouble free and hassle free under normal operation. Dampers are to be installed square and straight so as to prevent binding during operation. The following annual damper maintenance suggestions will help to insure proper damper operation and increase the life expectancy of the damper. Foreign Matter Moving Parts Over the course of time, dirt and grime may collect on damper surfaces.
PAGE 122
Model: HD80 Designation: EF-803 SPECIFICATION SHEET MODELS HD50 & HD80 HEAVY DUTY CEILING/WALL FANS Quiet heavy duty ceiling/wall fans built with high performance blowers, attractive metal grilles. TYPICAL SPECIFICATION Ceiling/wall fan shall be Broan Model HD50 (HD80).
PAGE 123
PERFORMANCE RATINGS - MODELS HD50 & HD80 AMCA LICENSED PERFORMANCE Static Pressure (in. wg Ps) Model No. 0.0 0.1 .125 .250 .375 Volts Watts HD50 HD80 CFM 61 51 48 31 Sones 1.9 2.2 2.3 3.0 9 Nominal RPM Duct Size 120 30 1070 4" Round 120 50 1380 4" Round 3.3 CFM 93 84 81 65 47 Sones 4.0 4.1 4.1 4.3 4.6 The performance ratings include the effects of inlet grille and backdraft damper in the airstream. Speed (RPM) shown is nominal.
PAGE 124
CEILING VENTILATORS/VENTILADORES DE CIELO RASO MODELS/MODELOS HD50 • HD80 READ AND SAVE THESE INSTRUCTIONS TYPICAL INSTALLATIONS POWER CABLE MOUNTING TABS LEA Y CONSERVE ESTAS INSTRUCCIONES CEILING JOIST WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: 1. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer at the address or telephone number listed in the warranty. 2.
PAGE 125
INSTALACIONES TÍPICAS CABLE DE ALIMENTACIÓN TYPICAL INSTALLATIONS ALETAS DE MONTAJE 4" ROUND DUCT VEGUETA DEL TECHO POWER CABLE CUBIERTA HOUSING MATERIAL DEL TECHO CABLE DE ALIMENTACIÓN ALETAS DE MONTAJE VIGUETA O VIGA DE 2x4 DE CIELO RASO ESTRUCTURA ADICIONAL * CUBIERTA VIGUETA O VIGA DE 2x4 DE CIELO RASO REJILLA CUBIERTA MONTADA EN UNA VIGA DE 2x4 Se requiere una estructura adicional para las aletas de montaje. Descarga paralela a las viguetas.
PAGE 126
INSTALACIÓN DE LA CUBIERTA (continuación) INSTALL THE HOUSING (continued) Existing Construction Construcción existente 1. Choose the location for your fan in the ceiling. For best possible performance, use the shortest possible duct run and a minimum number of elbows. 2. In attic, position mounting brackets against joist. Trace outline of housing on ceiling material. 3. Set housing aside and cut ceiling opening slightly larger than marked. 4.
PAGE 127
USE AND CARE INSTRUCCIONES DE OPERACIÓN Y LIMPIEZA WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND LOCK OUT SERVICE PANEL BEFORE CLEANING OR SERVICING THIS UNIT. ADVERTENCIA: ANTES DE LIMPIAR O DAR SERVICIO ESTA UNIDAD, DESCONECTE EL SUMINISTRO DE ENERGÍA Y BLOQUEE EL PANEL DE SERVICIO . MOTOR LUBRICATION LUBRICACIÓN DEL MOTOR The motor is permanently lubricated. Do not oil or disassemble motor. El motor está permanentemente lubricado. No lubrique ni desmonte el motor.
PAGE 128
KING ELECTRIC - Electric Heaters - SL SERIES WALL HEATER PIC-A-WATT SLI... Model: SL-1215 Designation: UH-803 Home Jefferson Shop Building Products News Heat Loss Calculator Page 1 of 3 Phone: 206.762.0400 Search Helpful Information Electrical Equipment O&M Manual http://www.king-electric.com/prodtemp.
PAGE 129
KING ELECTRIC - Electric Heaters - SL SERIES WALL HEATER PIC-A-WATT SLI... Page 2 of 3 Download/Print PDF Brochure for this product SL 28-29.pdf Jefferson Shop Building Electrical Equipment O&M Manual http://www.king-electric.com/prodtemp.
PAGE 130
SAVE THESE INSTRUCTIONS INSTALLATION INSTRUCTIONS SMART LIMIT PROTECTION® PAW - DEC - SL SERIES Wall Heaters Models: 1215 (120V) 2422 (240V) 2022 (208V) 2720 (277V) DANGER ELECTRIC SHOCK OR FIRE HAZARD DO NOT INSTALL VERTICALLY READ ALL WIRE SIZING, VOLTAGE REQUIREMENTS AND SAFETY DATA TO AVOID PROPERTY DAMAGE AND PERSONAL INJURY WARNING It is extremely important to verify the electrical power supply is the same voltage as the heater being installed.
PAGE 131
SAVE THESE INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION WIRING DIAGRAM WATTAGE SELECTION 5. Select heater wattage (see diagram). King recommends the installer indicate the selected heater wattage by circling the wattage listed on the nameplate. To prevent the heater from being rewired to a higher wattage, cut the pushon ¼" female terminal off the disconnected wire (orange, blue or yellow). Tape all exposed wires.
PAGE 132
SAVE THESE INSTRUCTIONS INSTALLATION INSTRUCTIONS COMMONLY ASKED QUESTIONS SL exploded view Q. Will the room heat up faster if I put the thermostat on 90 degrees when I get home? A. No. The thermostat is just an on-off switch that is temperature sensitive. The heater is either on or off. Q. My baseboards are on outside walls, should fan heaters be also? A. No. A fan heater, recessed into an outside wall, will create extra heat loss and air leakage for that room.
PAGE 133
KING ELECTRICAL MFG. CO. · 9131 10TH AVE SOUTH · SEATTLE, WA 98108 CLEANING & MAINTENANCE GUIDE FOR PAW - DEC - SL SERIES HEATERS Regular maintenance on an electric wall heater will prolong the life of the product and keep it operating safely. Heaters should be cleaned and inspected every 6 months. This guide will show in detail how to properly clean and maintain your King electric wall heater. It will also show when parts or perhaps the entire heater should be replaced.
PAGE 134
SAVE THESE INSTRUCTIONS INSTALLATION INSTRUCTIONS Heating Element 277 Volt Wiring Diagram Optional Thermostat Single Pole 1000 Watts 1000 Watts Red Black Black L1 Fan Motor Black Green High Limit L2 Ground Field Connections Warning: Check nameplate voltage on heater before connecting to power source.
PAGE 135
MUH SERIES Model: MUH-0341 Designation: UH-801, UH-802 • 2-speed fan selector switch (25 to 50 KW models). • Fan delay feature eliminates cold drafts. Element heats up before fan cuts in, then fan continues to distribute heat after element shuts off. • Ruggedly built, yet lighter weight for easier installation. No piping flutes, valves, or traps. • Individually adjustable discharge louvers to control air flow.
PAGE 136
MUH Series Modular Unit Heaters FILE #E21609 Installation, Operation & Maintenance Instructions Dear Owner, Congratulations! Thank you for purchasing this new heater manufactured by Marley Engineered Products. You have made a wise investment selecting the highest quality product in the heating industry. Please carefully read the installation and maintenance instructions shown in this manual. You should enjoy years of efficient heating comfort with this product from Marley Engineered Products...
PAGE 137
MOUNTING THE HEATER - GENERAL The heater may be mounted to discharge the heated air either horizontally or vertically. When the heater is mounted for vertical discharge, it is recommended that the heater be positioned so that the access door will open away from the wall to provide greater access to the wiring and control compartment.
PAGE 138
Important Note - Installation Screw Lug Torque: During transportation it is possible screw lug connections can loosen. After installation, before power is turned on to the heater, check all screw lug connections for tightness to a recommended minimum torque of 35 in-lbs. (3.9 N-m). Horizontal Discharge (Rod-mount from Ceiling) 1. Install four threaded mounting rods in the threaded holes and secure in place using lock nuts. (See Table 2). 2. Securely attach the four mounting rods to the ceiling.
PAGE 139
LEAD WIRE "A1" HEATER FRONT HEATER FRONT 3 PHASE BLOCK 3 PHASE BLOCK LEAD WIRE "A1" TO ELEMENTS TO ELEMENTS LEAD WIRE "B1" B A ELEMENTS CONTACTOR (OR P2) LEAD WIRE "B1" POWER TERMINAL BLOCK A ELEMENTS CONTACTOR (OR P2) REMOTE SUMMER FAN SWITCH (MRFS-1) S B POWER TERMINAL BLOCK RED LACK TO W1 BLACK FACTORY-WIRED FOR SINGLE-PHASEFANPOWER RELAY FIELD-WIRED FOR THREE-PHASE POWER (FOR MRFS-2 AMD MHRT) T Figure 3a.
PAGE 140
Table 4. Specifications Basic Model No. Height in (mm) Width in. (mm) Depth in. (mm) Mounting Weight lbs. (kg) MUH0381 27 (12.2) MUH0321 27 (12.2) MUH0371 27 (12.2) MUH0341 30 (13.6) MUH0581 MUH0521 MUH0571 27 (12.2) 16 (406.4) 14 (355.6) 1 7 /2 (190.5) 27 (12.2) 27 (12.2) MUH0541 30 (13.6) MUH0331 30 (13.6) MUH0361 30 (13.6) MUH0531 30 (13.6) MUH0561 30 (13.6) MUH078 38 (17.2) MUH072 38 (17.2) MUH077 38 (17.2) MUH074 MUH108 MUH102 19 (482.6) 71/2 (190.5) 38 (17.
PAGE 141
LIMITED WARRANTY All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of installation, except heating elements which are warranted against defects in workmanship and materials for five years from date of installation.