User manual

© MARMITEK
12
Can I only use the BoomBoom 55 with headphones?
No, you can use the BoomBoom 55 with any Bluetooth device
with audio playback capability. Including, for example, a Bluetooth
speaker or a Marmitek BoomBoom 93 Bluetooth music receiver. If
attached to your audio system, you can choose whether you want
to hear the sound using the audio system and/or your
headphones, or through the TV's speakers.
Whenever I watch TV, audio is out of sync with video.
The wireless transmission of audio over Bluetooth may indeed
result in some delay (latency).
In most cases, this latency is not disturbing.
If you use a media box to watch TV, connect the BoomBoom 55 to
the audio output of your media box. This results in reduced
latency.
The BoomBoom 55 also supports aptX Low Latency technology.
Your Bluetooth headphones also need to have this technology to
be able to use this. With an aptX Low Latency connection, the
LED turns green.
The sound is distorted by a hum or interference
If you do not use an adapter to power the BoomBoom 55, but, for
example, connect it to your audio system's USB connector, the
resulting ground loop may sometimes cause a hum. In this case,
use the USB power adapter. Using a USB port on, for example, a
PC may also cause interference.
Can I pair a Bluetooth device with aptX Low Latency and a
second device without aptX Low Latency?
Yes, you can. If two devices are paired, aptX Low Latency cannot
be used.
Do you have any other questions that have not been resolved by the above
information? Please go to www.marmitek.com