User manual

During standby mode, a short press of the Talk/answer

button / (16) will initiate communication with the

door unit and wake up the screen (18) showing the

view as captured by the lens (6) (In case a backgate

caller unit has been installed, the screen (18) will

prompt you to select “FRONT” or “BACK”. Use the

left/right key (9) (10) to select and menu key (11)

to confirm.).

Long touch the menu key (11) for over 2 sec to

show the menu on the screen (18):

Use the left/right key (9) (10) to select the

parameters to be set, then short touch the menu key

(11) to confirm. The selectable values now show

yellow while the parameter description resumes the

light blue colour.

CALLER SETTING

GATE

This will select the door unit you prefer to change the

settings for. Use the left/right key (9) (10) to select

between FRONT or BACK gate, then short touch the

menu key (11) to confirm your setting.

VOLUME

This will set the speaker volume of the door unit. Use

the left/right key (9) (10) to select between the 5 levels with 1 being the

lowest and 5 being the highest volume. Short touch the menu key (11) to

confirm your setting.

BRIGHTNESS

This will set the brightness of the visitor’s image as shown on the screen (18).

Use the left/right key (9) (10) to select between the 5 levels with 1 being

the lowest and 5 being the highest brightness. Short touch the menu key

(11) to confirm your setting.

CONTRAST

This will set the contrast of the visitor’s image as shown on the screen (18).

Use the left/right key (9) (10) to select between the 5 levels with 1 being

the lowest and 5 being the highest contrast. Short touch the menu key (11)

to confirm your setting.