User manual

Video DoorPhone 210

ENGLISH

GATE LIGHT

For the door unit installed at a location where there is not enough illumination

even at day time, this function can be used to switch on the white LED every

time the call button (1) is being pressed which serves as a back-up light to

illuminate the face of your visitor.

Use the left/right key (9) (10) to select between ON, OFF or AUTO. Short

touch the menu key (11) to confirm.

ON: gate light always on once the call button (1) is pressed.

OFF: gate light always off.

AUTO: gate light will go on, once the call button (1) is pressed and when

the light sensor (5) detects a low light intensity.

After completing the settings, select RETURN to go back to the main menu.

ALARM MODE

This will set the method of alert when a visitor calls, either with a ding-dong

sound or vibration or both. Use the left/right key (9) (10) to select between

(ding-dong sound and vibration) or (ding-dong sound only) or

(vibration only). Short touch the menu key (11) to confirm.

The corresponding icon will be shown on the top of the screen (18). In case

blank is selected, no ding-dong sound and vibration alert will be provided;

only the visitor’s image will be shown on the screen (18) when someone

calls.

DOOR LOCK OPEN

This is to activate or deactivate the door lock open key (13). Use the

left/right key (9) (10) to select between “ACTIVATE” or “DEACTIVATE”,

Short touch the menu key (11) to confirm. In case DEACTIVATE is

selected, the icon will show up at the top part of the screen (18).

TRIGGER TIME

This is the duration time for how long the door lock is being triggered. Use the

left/right key (9) (10) to select between 2, 5, 10, 20 or 25 seconds. Short

touch the menu key (11) to confirm.

DATE/TIME

This will set the internal clock. Use the left/right key (9) (10) to set the

year/month/date as well as the hour/minute, touch the menu key (11) to

confirm your setting. In case the Li battery has totally run down, the internal

clock will stop and it is necessary to set the time again after the battery is

charged up.