User manual

Video DoorPhone 210

ENGLISH

MISSED CALL(S)

Under the circumstances of an unanswered call from a

visitor (e.g. you are away from home), the missed call

indicator will start flashing in standby mode. At the

same time, the text “X MISSED CALL(S)“ will be shown

at the bottom part of the screen (18) whenever it is

woken up (X represents the total number of missed

calls, the maximum number of missed calls that can be

stored is 10, with the most updated entry overriding the

oldest entry).

Short press the Talk/answer button / (16) to initiate

the screen (18). Short touch the missed calls key

(14) to show the 1st image, touch again will show the

subsequent images until after the last recorded image,

the screen (18) will prompt you if you prefer to delete

the images, use the left/right key (9) (10) to select

and the menu key (11) to confirm. In case NO is

selected, the missed calls indicator will continue to

flash until all stored images are deleted.

PRECAUTION

x Use only the supplied AC switching power supply for charging the

handset. Use of another supply may cause damage to the handset.

x Do not mix old and new alkaline batteries in the door unit.

x When not using the Video DoorPhone 210 for a long period of time,

remove all batteries from the handset and the door unit to avoid battery

leakage.

x Do not leave the handset exposed to strong sunlight for a long period of

time or near any heat source, moisture and an excessive dusty

environment.

x Do not open the cabinet; no serviceable parts are inside.

x When using for the first time, switch off the handset and charge up the

supplied battery pack for 4 – 5 hours using the charger stand.