User manual

© MARMITEK
8
3.1 Required cable type
Please ensure that the power to the system is off during
installation.
To connect the camera doorbell to the monitor, you can use the supplied
4-wire cable.
Should you want to cross a longer distance, please refer to the following
table for the required type of cable:
Cable length
Required cable type
1-25m
4-wire cable of minimum 4x 0.2mm
2
, unshielded
25-50m
4-wire cable of minimum 4x 0.3mm
2
, shielded
50-80m
4-wire cable of minimum 4x 0.5mm
2
, shielded
80-100m
coaxial cable, 75 ohm of minimum 1.55mm
2
+ 2-wire
audio cable of 0.55mm
2
CAT5 or CAT6 network cable connections (not recommended)
You can use the two included additional connectors for this.
Unshielded cable (<25m)
Shielded cable (<80m)
Coaxial cable + 2-wire audio cable (<100m)
Unshielded network cable (<25m)
Shielded network cable (<50m)
Afscherming
Afscherming