Instructions

Safety Instructions
Please read these instructions thoroughly before you
use the device and keep them for future reference.
• Only for indoor use.
• Do not expose the product to extremely high or low
temperatures, strong light sources or direct sunlight.
• This product is not a toy. Keep out of reach of
children.
• Connect the adapter to the mains only after you have
verified that the line voltage corresponds to the value
specified on the type plates.
• Disconnect the AC/DC power adapter from the mains
when this device is not in use for prolonged time.
• Never open the product: the device may contain parts
with deadly voltage.
• Repairs or service should only be performed by
qualified personnel.
Requirements
This product requires a stable working Wi-Fi network
(username/ password) connected to the internet.
Installation of the Smart me app
Download and install the Marmitek Smart me app from
the Apple app store or the Google Play store.
Launch the Smart me app after installation is completed.
Follow the instructions and register for a new account.
Installation of the View ME
• Power the Smart camera by connecting the adapter
into the electrical wall socket.
• The indicator light should start flashing quickly and a
tone is heard. If it’s not flashing, hold the button for 5-
6 seconds until it begins flashing.
• Launch the Smart me app from your smart phone or
tablet.
• Click on the + (upper right corner) to add a new
device, confirm if the light bulb flashes quickly and
follow the instructions.
• Scan the QR code by holding the code 20cm in front
of the camera lens and confirm when a beep is heard
from the camera.
• Press Help button during installation for more
information or when installation fails.
Notes for using the product
• After the installation is completed you can control and
configure the camera by using the app.
• Check our website www.marmitek.com for more
details and how to use the Smart me products.
Technical specifications
Video resolution 1080p
Detection angle 115 degrees
Compression H.264
Bandwidth 32kbps ~ 2Mbps
Night vision infrared up to 10m
Audio Two-way
SD card slot up to 128Gb, not included
Wireless technology Wi-Fi 2.4GHz
Power 220-240 VAC 50/60 Hz
5 VDC micro USB adapter
Power consumption max 2.5 Watt
Standy power < 0.5 Watt
Dimensions 60 x 78 mm
Declaration of Conformity
Hereby, Marmitek BV, declares that the
View ME is in compliance with the essential
requirements of the 2014/53/EU Directives.
Full Declaration of Conformity is available at
www.marmitek.com/en/declarations-of-conformity/
More detailed user guide and instructions are available
on our website at www.marmitek.com