Security Camera User Manual

11SD MEMORYCAM2™
ENGLISH
3. File folders mode:
When the SD recorder is in overview mode, press ‘PLAY’ button to enter file folders mode. Use arrow
keys to select the folder you want to review and then press ‘OK’ to open it.
Press ‘PLAY’ again to return to file folders mode.
Delete pictures, videos and folders:
Press ‘PLAY’ button to enter reproduction mode. Press ‘RIGHT’ or LEFT ARROWkey to start the slide
show. Press ‘OK’ to stop and stay at the picture you want to delete. Then press (QUICK SHOT)’
button, select ‘YES’ and press ‘OK’ button to delete.
When the SD recorder is in the reproduction mode, press ‘PLAY’ to enter overview mode and then press
‘PLAY’ button again to enter file folders mode. Use ‘UP’ and ‘DOWN ARROWkeys to select the file folder
you want to delete. Then press ‘ (QUICK SHOT)’ button, select ‘YES’ and press ‘OK’ to delete.
Note: It may take a while to process when deleting folders if there are too many photos/videos in
folders.
Delete all photos and videos from the SD card (formatting):
Press ‘PLAY’ button to enter reproduction mode, and press ‘PLAY’ again to enter overview mode. Press
‘PLAY’ button once again to enter file folders mode. Press (QUICK SHOT)’ button, select ‘YES’ and
press ‘OK’ to delete all photos and videos.
Note: When you are in reproduction, overview or file folders mode, the SD recorder will return to live
mode automatically after 3 minutes if no functional keys are pressed.
5. FREQUENTLY ASKED QUESTIONS
Can I connect more than one camera to the SD recorder?
Basically, any video camera (max. 2) that uses a composite video signal, such the Marmitek MegaCam1
colour camera, can be connected onto the SD recorder. Art no: 09635 is suitable for this (in that case the
extra camera must use its own power supply).
Do you still have questions? Please check out www.marmitek.com for more information.
6. TECHNICAL DATA
Camera:
Image sensor: Colour 1/3” CMOS
Camera preset focus: 3 meters.
Resolution: 380 TV lines.
Scanning system: 2:1 interline.
Lens F6.0mm F2.0
Video signal NTSC PAL
510H x 492V 628H x 582V
Min. illumination 3 Lux (F1.2)
5 IR LED For extra night vision up to 1.5 metres
S/N Ratio: > 42dB(A)
Power adapter 100-240VAC 50/60Hz 5V DC/1A
Consumption: 0.65A
IP value IP44, splash waterproof , for mounting outside in a sheltered place
Ambient temperature: - 10° C to + 40° C (operation)
Dimensions: 125mm x 112mm x 72mm